An asymmetric broadcast ATM switching network using output buffer

Yoshiaki Tanaka, Shyu Shimizu, Atsushi Miyake

    研究成果: Article

    抄録

    Numerous broadcast ATM switching networks have been proposed and studied so far, but most of them are constructed with symmetric switches, which have the same number of input and output ports. Transit switching networks may be symmetric, but local switching networks must be asymmetric, because the numbers of input ports and output ports of local switching networks are different. An asymmetric broadcast ATM switch can be constructed with copy networks and routing networks, which consist of a number of symmetric switches. Another type of broadcast ATM switch uses output buffer ATM switches. This type of switch can establish point to multipoint connections easily, and it can also be extended to an asymmetric switching network. This paper proposes an asymmetric switching network using output buffer switches and not using copy networks. Conventionally, an output buffer switch has good switching performance, but it requires large amounts of hardware. This paper proposes to reduce the switching network hardware size using concentrators, and by applying newly developed bus interface switches. It also presents the traffic performance and reduction of switching hardware for concentrating traffic.

    元の言語English
    ページ(範囲)59-67
    ページ数9
    ジャーナルElectronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)
    80
    発行部数8
    出版物ステータスPublished - 1997 8

    Fingerprint

    Switching networks
    Automatic teller machines
    Switches
    Hardware
    Network routing

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Computer Networks and Communications

    これを引用

    @article{8951911644854397b8e72fb4b4246de0,
    title = "An asymmetric broadcast ATM switching network using output buffer",
    abstract = "Numerous broadcast ATM switching networks have been proposed and studied so far, but most of them are constructed with symmetric switches, which have the same number of input and output ports. Transit switching networks may be symmetric, but local switching networks must be asymmetric, because the numbers of input ports and output ports of local switching networks are different. An asymmetric broadcast ATM switch can be constructed with copy networks and routing networks, which consist of a number of symmetric switches. Another type of broadcast ATM switch uses output buffer ATM switches. This type of switch can establish point to multipoint connections easily, and it can also be extended to an asymmetric switching network. This paper proposes an asymmetric switching network using output buffer switches and not using copy networks. Conventionally, an output buffer switch has good switching performance, but it requires large amounts of hardware. This paper proposes to reduce the switching network hardware size using concentrators, and by applying newly developed bus interface switches. It also presents the traffic performance and reduction of switching hardware for concentrating traffic.",
    keywords = "ATM, Broadcasting, Output buffer switching network, Switching network, Switching system",
    author = "Yoshiaki Tanaka and Shyu Shimizu and Atsushi Miyake",
    year = "1997",
    month = "8",
    language = "English",
    volume = "80",
    pages = "59--67",
    journal = "Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)",
    issn = "8756-6621",
    publisher = "John Wiley and Sons Inc.",
    number = "8",

    }

    TY - JOUR

    T1 - An asymmetric broadcast ATM switching network using output buffer

    AU - Tanaka, Yoshiaki

    AU - Shimizu, Shyu

    AU - Miyake, Atsushi

    PY - 1997/8

    Y1 - 1997/8

    N2 - Numerous broadcast ATM switching networks have been proposed and studied so far, but most of them are constructed with symmetric switches, which have the same number of input and output ports. Transit switching networks may be symmetric, but local switching networks must be asymmetric, because the numbers of input ports and output ports of local switching networks are different. An asymmetric broadcast ATM switch can be constructed with copy networks and routing networks, which consist of a number of symmetric switches. Another type of broadcast ATM switch uses output buffer ATM switches. This type of switch can establish point to multipoint connections easily, and it can also be extended to an asymmetric switching network. This paper proposes an asymmetric switching network using output buffer switches and not using copy networks. Conventionally, an output buffer switch has good switching performance, but it requires large amounts of hardware. This paper proposes to reduce the switching network hardware size using concentrators, and by applying newly developed bus interface switches. It also presents the traffic performance and reduction of switching hardware for concentrating traffic.

    AB - Numerous broadcast ATM switching networks have been proposed and studied so far, but most of them are constructed with symmetric switches, which have the same number of input and output ports. Transit switching networks may be symmetric, but local switching networks must be asymmetric, because the numbers of input ports and output ports of local switching networks are different. An asymmetric broadcast ATM switch can be constructed with copy networks and routing networks, which consist of a number of symmetric switches. Another type of broadcast ATM switch uses output buffer ATM switches. This type of switch can establish point to multipoint connections easily, and it can also be extended to an asymmetric switching network. This paper proposes an asymmetric switching network using output buffer switches and not using copy networks. Conventionally, an output buffer switch has good switching performance, but it requires large amounts of hardware. This paper proposes to reduce the switching network hardware size using concentrators, and by applying newly developed bus interface switches. It also presents the traffic performance and reduction of switching hardware for concentrating traffic.

    KW - ATM

    KW - Broadcasting

    KW - Output buffer switching network

    KW - Switching network

    KW - Switching system

    UR - http://www.scopus.com/inward/record.url?scp=0031209817&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0031209817&partnerID=8YFLogxK

    M3 - Article

    AN - SCOPUS:0031209817

    VL - 80

    SP - 59

    EP - 67

    JO - Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)

    JF - Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)

    SN - 8756-6621

    IS - 8

    ER -