An iterative design methodology for the performance optimisation of magnetorheological piston head configurations

Gonzalo Aguirre Dominguez, Mitsuhiro Kamezaki, Morgan French, Shigeki Sugano

研究成果: Conference contribution

1 引用 (Scopus)

抜粋

This work focuses on the analysis of the performance parameters of a new magneto-rheological device. Previously, a mathematical model of the actuator head was introduced; however, the complex relations between its parameters made its optimisation challenging, causing the device not to reach its full potential. In this work, the previous model is updated to fit a revised version of the toroidal design, as well as an annular design for comparison. The relations between different parameters are studied to find their trade-offs, and understand how they affect the performance of the actuators. Finally, an optimisation based on an iterative search for valid permutations of parameters, is used to find optimal combinations. Two prototypes are built and tested to validate the results of the optimisation. The study revealed the critical parameters of each design, which mostly depend on the relations between the magnetic flux density, and the active area exposed to the MRF; and successfully optimised the performance of the devices. However, work needs to be done to create a more complete tool with concrete guidelines for specific applications.

元の言語English
ホスト出版物のタイトル2016 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016
出版者Institute of Electrical and Electronics Engineers Inc.
ページ228-233
ページ数6
2016-September
ISBN(電子版)9781509020652
DOI
出版物ステータスPublished - 2016 9 26
イベント2016 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016 - Banff, Canada
継続期間: 2016 7 122016 7 15

Other

Other2016 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016
Canada
Banff
期間16/7/1216/7/15

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering
  • Computer Science Applications
  • Software

フィンガープリント An iterative design methodology for the performance optimisation of magnetorheological piston head configurations' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Dominguez, G. A., Kamezaki, M., French, M., & Sugano, S. (2016). An iterative design methodology for the performance optimisation of magnetorheological piston head configurations. : 2016 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016 (巻 2016-September, pp. 228-233). [7576771] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AIM.2016.7576771