An optimal configuration design method for HTS-SMES coils

So Noguchi; Atsushi Ishiyama; S. Akita; H. Kasahara; Y. Tatsuta; S. Kouso

doi:10.1109/TASC.2005.849337

An optimal configuration design method for HTS-SMES coils

So Noguchi, Atsushi Ishiyama, S. Akita, H. Kasahara, Y. Tatsuta, S. Kouso

先進理工学部

研究成果: Article › 査読

35 被引用数 (Scopus)

抄録

Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.

本文言語	English
ページ（範囲）	1927-1930
ページ数	4
ジャーナル	IEEE Transactions on Applied Superconductivity
巻	15
号	2 PART II
DOI	https://doi.org/10.1109/TASC.2005.849337
出版ステータス	Published - 2005 6

ASJC Scopus subject areas

電子材料、光学材料、および磁性材料
凝縮系物理学
電子工学および電気工学

文献へのアクセス

10.1109/TASC.2005.849337

他のファイルとリンク

引用スタイル

@article{8f1f34e2d3d2453ea6f010a6c194cf5a,

title = "An optimal configuration design method for HTS-SMES coils",

abstract = "Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.",

keywords = "HTS tapes, Optimal configuration, SMES, Toroidal coil",

author = "So Noguchi and Atsushi Ishiyama and S. Akita and H. Kasahara and Y. Tatsuta and S. Kouso",

year = "2005",

month = jun,

doi = "10.1109/TASC.2005.849337",

language = "English",

volume = "15",

pages = "1927--1930",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2 PART II",

}

TY - JOUR

T1 - An optimal configuration design method for HTS-SMES coils

AU - Noguchi, So

AU - Ishiyama, Atsushi

AU - Akita, S.

AU - Kasahara, H.

AU - Tatsuta, Y.

AU - Kouso, S.

PY - 2005/6

Y1 - 2005/6

N2 - Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.

AB - Recently, the properties of high temperature superconducting tapes have been in advance and high temperature superconducting magnets have been constructed and demonstrated. However, the high temperature superconducting tapes have different thermal characteristics compared with low temperature superconducting wires. Therefore, it is necessary to consider these characteristics of high temperature superconducting tapes at the magnet design stage. We proposed an optimal design method for superconducting coils wound with Bi2223/Ag tapes. In this paper, the configuration of 72 MJ SMES coils wound with Bi2223/Ag tapes are optimized.

KW - HTS tapes

KW - Optimal configuration

KW - SMES

KW - Toroidal coil

UR - http://www.scopus.com/inward/record.url?scp=22044452696&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=22044452696&partnerID=8YFLogxK

U2 - 10.1109/TASC.2005.849337

DO - 10.1109/TASC.2005.849337

M3 - Article

AN - SCOPUS:22044452696

VL - 15

SP - 1927

EP - 1930

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 2 PART II

ER -

An optimal configuration design method for HTS-SMES coils

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル