An output-capacitorless low dropout regulator without resistors

Jie Mei, Hao Zhang, Tsutomu Yoshihara

    研究成果: Conference contribution

    2 被引用数 (Scopus)


    An all-MOSFET low-power low-dropout regulator is designed in CMOS technology, featuring low sensitivity with respect to input voltage and temperature. Supply voltage can be as low as 800mV. An error amplify (EA) with an embedded voltage reference (EVR) is employed and a buffer is used to improve the load transient. The circuit is simulated in 0.18 μm CMOS technology. Simulated results verify that the proposed LDO is stable for a capacitive load from 0 to 10 pF and with load capability of 50 mA. The maximum overshoot and undershoot under a 0.8 V supply are less than 90 mV for full load current changes within 1 μs edge time, and the recovery time is less than 1.5 μs. The temperature coefficient (TC) is 37.8 ppm/°C ranging from -25 °C to 100 °C.

    ホスト出版物のタイトルISOCC 2014 - International SoC Design Conference
    出版社Institute of Electrical and Electronics Engineers Inc.
    出版ステータスPublished - 2015 4 16
    イベント11th International SoC Design Conference, ISOCC 2014 - Jeju, Korea, Republic of
    継続期間: 2014 11 32014 11 6


    Other11th International SoC Design Conference, ISOCC 2014
    CountryKorea, Republic of

    ASJC Scopus subject areas

    • Hardware and Architecture

    フィンガープリント 「An output-capacitorless low dropout regulator without resistors」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。