Analyses of wet and dry cavity strategies for bwr severe accident management with melcor-2.2

Ayato Takashima, Akifumi Yamaji, Xin Li, Daisuke Fujiwara, Hiroshi Shirai, Takumi Noujuu

研究成果: Conference contribution

抄録

The current severe accident management measure for Boiling Water Reactors (BWRs) in Japan adopts pre-flooding of the drywell (D/W) floor when the reactor pressure vessel (RPV) is expected to fail to prevent failure of the primary containment vessel (PCV) (wet cavity strategy). This prioritizes rapid cooling of the corium and is expected to lead to more steam generation at the time of the RPV failure. The purpose of this study is to evaluate the influences of changes in the accident management measure on PCV integrity / failure mode and the amount of radioactive material released to the environment for BWRs. The accident scenario has been tentatively defined as the TQUV scenario, in which the water injection is assumed to fail after the RPV depressurization. A set of MELCOR analysis models, which had been used for the Fukushima accident analyses has been adopted to represent TQUV event of BWR4/Mark-I. The effects of fuel coolant interaction (FCI) has not been considered in the current modeling. The analysis results show that in the case without pre-flooding D/W, the D/W wall temperature exceeded 200 (which may be regarded as a rough estimate for the PCV failure by overheating) in about 30 minutes after the RPV failure. On the other hand, if water is continuously poured onto the D/W floor after the RPV failure, overheating failure of the PCV can be avoided, but over-pressure failure may occur within a few hours after the RPV failure.

本文言語English
ホスト出版物のタイトルComputational Fluid Dynamics (CFD); Verification and Validation; Advanced Methods of Manufacturing (AMM) for Nuclear Reactors and Components; Decontamination, Decommissioning, and Radioactive Waste Management; Beyond Design Basis and Nuclear Safety; Risk Informed Management and Regulation
出版社American Society of Mechanical Engineers (ASME)
ISBN(印刷版)9784888982566
DOI
出版ステータスPublished - 2021
イベント2021 28th International Conference on Nuclear Engineering, ICONE 2021 - Virtual, Online
継続期間: 2021 8 42021 8 6

出版物シリーズ

名前International Conference on Nuclear Engineering, Proceedings, ICONE
3

Conference

Conference2021 28th International Conference on Nuclear Engineering, ICONE 2021
CityVirtual, Online
Period21/8/421/8/6

ASJC Scopus subject areas

  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Analyses of wet and dry cavity strategies for bwr severe accident management with melcor-2.2」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル