Application-coexistent wire-rate network monitor for 10 gigabit-per-second network

To apply network monitoring functions to emerging high-quality video streaming services, we proposed an application-coexistent monitor (APCM). In APCM, a streaming server can works as an active monitor and a passive monitor. In addition, IP packets sent from the server carry monitoring information together with application's data such as video signals. To achieve APCM on a 10-Gbps network, we developed a network interface card for an application-coexistent wire-rate network monitor (AWING NIC). It provides (1) a function to append GPS-based accurate timestamps to every packet that streaming applications send and receive, which can be used for real-time monitoring of delays and inter-packet gap, and (2) functions to capture and generate 10-Gbps wire-rate traffic without depending on packets' size, achieved by our highly-efficient DMA-transfer mechanisms. Such monitoring capability are unprecedented in existing PC-based systems because of the limitation in PC system's architecture. As an evaluation of APCM in an actual network, we conducted an experiment to transmit a 6-Gbps high-quality video stream over an IP network with the system in which we installed the AWING NIC. The results revealed that the video stream became highly bursty by passing through the network, and the observed smallest inter-packet gap corresponds to the value of 10-Gbps wire-rate traffic, which supports the effectiveness of our development.