Application of probabilistic safety analysis in design and maintenance of the ABWR

Masahiko Fujii, Shinichi Morooka, Hideaki Heki

研究成果: Chapter

抄録

A brief history of the development of nuclear reactor in Japan is summarized in Fig. 1.1. In the 1960s, nuclear reactor technology was introduced mainly from the United States. But in this era, the capacity factor of Japanese boiling water reactors (BWRs) is low because of initial problems such as stress corrosion cracking (SCC). A program to improve the nuclear reactor performance was started. In the 1970s, phases-I and-II of this program was carried out for the purpose of improvement, standardization, and localization of conventional light water reactors (LWRs). The final stage of this program was carried out in the 1980s to develop advanced reactors (both ABWR and APWR), which had to meet the following objectives.

本文言語English
ホスト出版物のタイトルAdvances in Light Water Reactor Technologies
出版社Springer New York
ページ1-30
ページ数30
ISBN(印刷版)9781441971005
DOI
出版ステータスPublished - 2011
外部発表はい

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Application of probabilistic safety analysis in design and maintenance of the ABWR」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル