Application of Sn-Ni alloy as an anode for lithium-ion capacitors with improved volumetric energy and power density

Seongki Ahn, Yusuke Nakamura, Hiroki Nara, Toshiyuki Momma, Wataru Sugimoto, Tetsuya Osaka

研究成果: Article査読

5 被引用数 (Scopus)

抄録

Lithium-ion capacitors (LIC) constructed by combining a supercapacitor-like cathode and battery-like anode are expected to bridge a gap between low power density from lithium-ion batteries (LIB) and low energy density from the supercapacitors. In this study, we synthesize the Sn-Ni alloy by electrodeposition in the aqueous solution as an anode for LIC. The lower volume expansion rate of Sn-86 than pure Sn anode can be confirmed by in-operando investigation using an optically transparent cell during the 1st charging process. This is attribute to the co-deposited Ni can act as a buffer matrix to restrain volume expansion. For the full-cell test, the pre-lithiation condition of Sn-Ni was investigated with different depth of discharge levels. As a result, a LIC consisting of activated carbon (AC) cathode and Sn-86 exhibits a good cyclability for 3000 cycles with a capacity retention of 80% and coulombic efficiency of 98% at 3000th cycle. The Sn-Ni//AC LIC shows improved volumetric energy and power density than graphite//AC LIC. This study presents a new possibility of Sn-Ni alloy as an anode for the improved electrochemical performance of LIC.

本文言語English
ページ(範囲)A3615-A3619
ジャーナルJournal of the Electrochemical Society
166
15
DOI
出版ステータスPublished - 2019

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 再生可能エネルギー、持続可能性、環境
  • 表面、皮膜および薄膜
  • 電気化学
  • 材料化学

フィンガープリント

「Application of Sn-Ni alloy as an anode for lithium-ion capacitors with improved volumetric energy and power density」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル