Applying real-time simulator to microgrid and verification results of its accuracy

Takayuki Tanabe, Hironori Nakashima, Hiroshi Shinji, Toshihisa Funabashi, Ryuichi Yokoyama

研究成果: Article

抄録

The microgrid is an energy system which aims to improve the environmental performance by using renewable energy generations, and it aims to enhance the degree of autonomy without depending on the adjustment capability of electric utility system by maintaining own energy balance of the demand and supplies which uses plural distributed generations with various characteristics. Therefore, it is required that the demand and supply controller (DSC) is applied for the microgrid, and DSC is usually composed by computer system because flexible and intelligent management technology is necessary. On the occasion of developing the DSC, it is important that dynamic characteristics and behavior of the electric power grid are considered sufficiently, and it is difficult to develop the software of DSC without controllable actual facilities. Accordingly, we developed the real-time simulator (RTS) which can simulate behavior of the microgrid on the desk of software developer for aiming to develop the DSC efficiently. Developed RTS has a feature that enabled to simulate continuously both grid connecting operation and islanding operation by using a new proposing method. This paper presents the outline of RTS functions, calculating method, and modeling method of DG, and then it shows verification results of accuracy in RTS and evaluated result of real-time performance.

元の言語English
ページ(範囲)41-48
ページ数8
ジャーナルIEEJ Transactions on Power and Energy
130
発行部数1
DOI
出版物ステータスPublished - 2010

Fingerprint

Simulators
Controllers
Electric utilities
Distributed power generation
Energy balance
Computer systems

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology

これを引用

Applying real-time simulator to microgrid and verification results of its accuracy. / Tanabe, Takayuki; Nakashima, Hironori; Shinji, Hiroshi; Funabashi, Toshihisa; Yokoyama, Ryuichi.

:: IEEJ Transactions on Power and Energy, 巻 130, 番号 1, 2010, p. 41-48.

研究成果: Article

Tanabe, T, Nakashima, H, Shinji, H, Funabashi, T & Yokoyama, R 2010, 'Applying real-time simulator to microgrid and verification results of its accuracy', IEEJ Transactions on Power and Energy, 巻. 130, 番号 1, pp. 41-48. https://doi.org/10.1541/ieejpes.130.41
Tanabe, Takayuki ; Nakashima, Hironori ; Shinji, Hiroshi ; Funabashi, Toshihisa ; Yokoyama, Ryuichi. / Applying real-time simulator to microgrid and verification results of its accuracy. :: IEEJ Transactions on Power and Energy. 2010 ; 巻 130, 番号 1. pp. 41-48.
@article{30a19147015d4111871e456e542481a5,
title = "Applying real-time simulator to microgrid and verification results of its accuracy",
abstract = "The microgrid is an energy system which aims to improve the environmental performance by using renewable energy generations, and it aims to enhance the degree of autonomy without depending on the adjustment capability of electric utility system by maintaining own energy balance of the demand and supplies which uses plural distributed generations with various characteristics. Therefore, it is required that the demand and supply controller (DSC) is applied for the microgrid, and DSC is usually composed by computer system because flexible and intelligent management technology is necessary. On the occasion of developing the DSC, it is important that dynamic characteristics and behavior of the electric power grid are considered sufficiently, and it is difficult to develop the software of DSC without controllable actual facilities. Accordingly, we developed the real-time simulator (RTS) which can simulate behavior of the microgrid on the desk of software developer for aiming to develop the DSC efficiently. Developed RTS has a feature that enabled to simulate continuously both grid connecting operation and islanding operation by using a new proposing method. This paper presents the outline of RTS functions, calculating method, and modeling method of DG, and then it shows verification results of accuracy in RTS and evaluated result of real-time performance.",
keywords = "Microgrid, islanding operation, Power flow calculation, Real-time simulator",
author = "Takayuki Tanabe and Hironori Nakashima and Hiroshi Shinji and Toshihisa Funabashi and Ryuichi Yokoyama",
year = "2010",
doi = "10.1541/ieejpes.130.41",
language = "English",
volume = "130",
pages = "41--48",
journal = "IEEJ Transactions on Power and Energy",
issn = "0385-4213",
publisher = "The Institute of Electrical Engineers of Japan",
number = "1",

}

TY - JOUR

T1 - Applying real-time simulator to microgrid and verification results of its accuracy

AU - Tanabe, Takayuki

AU - Nakashima, Hironori

AU - Shinji, Hiroshi

AU - Funabashi, Toshihisa

AU - Yokoyama, Ryuichi

PY - 2010

Y1 - 2010

N2 - The microgrid is an energy system which aims to improve the environmental performance by using renewable energy generations, and it aims to enhance the degree of autonomy without depending on the adjustment capability of electric utility system by maintaining own energy balance of the demand and supplies which uses plural distributed generations with various characteristics. Therefore, it is required that the demand and supply controller (DSC) is applied for the microgrid, and DSC is usually composed by computer system because flexible and intelligent management technology is necessary. On the occasion of developing the DSC, it is important that dynamic characteristics and behavior of the electric power grid are considered sufficiently, and it is difficult to develop the software of DSC without controllable actual facilities. Accordingly, we developed the real-time simulator (RTS) which can simulate behavior of the microgrid on the desk of software developer for aiming to develop the DSC efficiently. Developed RTS has a feature that enabled to simulate continuously both grid connecting operation and islanding operation by using a new proposing method. This paper presents the outline of RTS functions, calculating method, and modeling method of DG, and then it shows verification results of accuracy in RTS and evaluated result of real-time performance.

AB - The microgrid is an energy system which aims to improve the environmental performance by using renewable energy generations, and it aims to enhance the degree of autonomy without depending on the adjustment capability of electric utility system by maintaining own energy balance of the demand and supplies which uses plural distributed generations with various characteristics. Therefore, it is required that the demand and supply controller (DSC) is applied for the microgrid, and DSC is usually composed by computer system because flexible and intelligent management technology is necessary. On the occasion of developing the DSC, it is important that dynamic characteristics and behavior of the electric power grid are considered sufficiently, and it is difficult to develop the software of DSC without controllable actual facilities. Accordingly, we developed the real-time simulator (RTS) which can simulate behavior of the microgrid on the desk of software developer for aiming to develop the DSC efficiently. Developed RTS has a feature that enabled to simulate continuously both grid connecting operation and islanding operation by using a new proposing method. This paper presents the outline of RTS functions, calculating method, and modeling method of DG, and then it shows verification results of accuracy in RTS and evaluated result of real-time performance.

KW - Microgrid, islanding operation

KW - Power flow calculation

KW - Real-time simulator

UR - http://www.scopus.com/inward/record.url?scp=77949359832&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77949359832&partnerID=8YFLogxK

U2 - 10.1541/ieejpes.130.41

DO - 10.1541/ieejpes.130.41

M3 - Article

AN - SCOPUS:77949359832

VL - 130

SP - 41

EP - 48

JO - IEEJ Transactions on Power and Energy

JF - IEEJ Transactions on Power and Energy

SN - 0385-4213

IS - 1

ER -