Aspheric single-element lens using birefringent material for miniaturized imaging system

Yupeng Zhang*, Toshitsugu Ueda

*この研究の対応する著者

    研究成果: Conference contribution

    1 被引用数 (Scopus)

    抄録

    An aspheric single-element lens made of birefringent material is proposed in this paper. This lens is capable of suppressing aliasing artifacts in a captured image, which is caused by inability of the image sensor to detect fine patterns with higher spatial frequency than the Nyquist frequency of the sensor array. At the same time, this lens possesses converging capability like a conventional convex lens and tolerable optical aberrations by employing aspheric surfaces. Compared to conventional imaging systems that use multi-lens structure to tackle optical aberrations and realize aliasing suppression by stacking up more than two optical low pass filters (OLPFs), an imaging system using our lens can greatly reduce the lens stack height and manufacturing cost. Image capturing simulation using the proposed lens indicates that aliasing artifacts are effectively reduced. This lens is expected to be used in miniaturized imaging system such as smartphone cameras and laptop cameras.

    本文言語English
    ホスト出版物のタイトルProceedings of IEEE Sensors
    DOI
    出版ステータスPublished - 2012
    イベント11th IEEE SENSORS 2012 Conference - Taipei
    継続期間: 2012 10 282012 10 31

    Other

    Other11th IEEE SENSORS 2012 Conference
    CityTaipei
    Period12/10/2812/10/31

    ASJC Scopus subject areas

    • 電子工学および電気工学

    フィンガープリント

    「Aspheric single-element lens using birefringent material for miniaturized imaging system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル