Assembly of hydrothermally synthesized tin oxide nanocrystals

Naoto Shirahata*, Atsushi Hozumi, Shuuichi Asakura, Akio Fuwa, Yoshio Sakka

*この研究の対応する著者

    研究成果査読

    5 被引用数 (Scopus)

    抄録

    We have successfully assembled highly crystalline tin oxide nanoparticles, which were synthesized through a simple hydrothermal approach, onto the chemical template of octadecyltrimethoxysilane self-assembled monolayer (OTS-SAM). Tin oxide nanoparticles were synthesized by refluxing ethanol containing 0.1 M of tin (IV) chloride pentahydrate at 70 °C for 3 h, and subsequently hydrothermally treating the resulted precipitates at 200 °C for 80 h. As a result, we could obtain the highly crystalline tin oxide nanoparticles. The average particle size and its distribution were estimated by high-resolution transmission electron microscopy observation to be about 5.8 nm and 27.6%. Area-selective assembly of tin oxide nanoparticles was performed by dipping a few drops of the suspension containing the nanoparticles onto the OTS-SAM template-covered silicon substrates, and then sonicating the substrate covered with the dried suspension in absolute toluene for 10 min. The nanoparticles assembled on the methyl-covered regions of the template were easily eliminated from the surface by the sonication, while those on the silanol-covered regions of the template remained tightly adhered to the substrate surface. As confirmed by atomic force microscopy, one-dimensional microarray of tin oxide was achieved on the substrates.

    本文言語English
    ページ(範囲)731-736
    ページ数6
    ジャーナルJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films
    23
    4
    DOI
    出版ステータスPublished - 2005 7

    ASJC Scopus subject areas

    • 表面、皮膜および薄膜
    • 表面および界面
    • 物理学および天文学(その他)

    フィンガープリント

    「Assembly of hydrothermally synthesized tin oxide nanocrystals」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル