BaySr1 - YTiO3 buffer layers for strain tuning of infinite-layer Sr1 - XLaxCuO2 thin films

Keita Sakuma*, Masataka Ito, Yilun He, Tetsuya Hajiri, Kenji Ueda, Hidefumi Asano

*この研究の対応する著者

研究成果: Article査読

1 被引用数 (Scopus)

抄録

We report on the precise tuning of lattice strain in an infinite-layer electron-doped high temperature superconductor Sr1 - xLaxCuO2 (SLCO; aSLCO = 0.3949 nm for x = 0.1), which is a perovskite-related oxide, using perovskite BaTiO3-SrTiO3 (BSTO; BaySr1 - yTiO3) buffer layers. The BSTO buffer layers formed on (001) (La0.18Sr0.82)(Al0.59Ta0.41)O3 substrates by magnetron sputtering were fully relaxed with high crystalline quality due to high oxygen partial pressure deposition and post annealing at 950 °C. The lattice constants of the BSTO buffer layers could be controlled in the range of 0.3926-0.3973 nm by changing the Ba content (y = 0.2-0.7). These BSTO buffer layers allow coherent growth of SLCO thin films, and a clear dependence of the superconducting transition temperature on the lattice strain was observed. The fabrication of these BSTO/superconductor heterostructures may provide novel devices composed of functional perovskite thin films, in addition to a general approach for the precise control of lattice strain in functional perovskite thin films.

本文言語English
ページ(範囲)8-13
ページ数6
ジャーナルThin Solid Films
612
DOI
出版ステータスPublished - 2016 8月 1
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 表面および界面
  • 表面、皮膜および薄膜
  • 金属および合金
  • 材料化学

フィンガープリント

「BaySr1 - YTiO3 buffer layers for strain tuning of infinite-layer Sr1 - XLaxCuO2 thin films」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル