Calculation of degree of mineral matter liberation in coal from sink-float separation data

T. Oki, H. Yotsumoto, S. Owada

研究成果: Article

19 引用 (Scopus)

抜粋

A method for calculating the degree of mineral matter liberation by the sink-float separation data of coal was studied. The mineral composition was estimated by norm calculation using the results of elemental analyses of sink-float separated coals. The content of the inherent ash from the lowest density fraction and the minimum limit of the locked particle rate from the highest density fraction were also estimated, and the degree of the maximum mineral matter liberation (MLmax) was calculated from these results. The MLmax can be easily measured by carrying out sink-float separation at only two density points, and by measuring the weight, ash content, and ash element of these three density fractions. Because coal properties such as particle size and mineral composition are well reflected in the value, the MLmax is useful as a substitute index of the true degree of liberation.

元の言語English
ページ(範囲)39-51
ページ数13
ジャーナルMinerals Engineering
17
発行部数1
DOI
出版物ステータスPublished - 2004 1 1

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Chemistry(all)
  • Geotechnical Engineering and Engineering Geology
  • Mechanical Engineering

フィンガープリント Calculation of degree of mineral matter liberation in coal from sink-float separation data' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用