Carbon-carbon composite turbine disk for the air turbo ramjet engine (ATREX)

Ken Goto, Hiroshi Hatta*, Yasuo Kogo, Hiroshi Fukuda, Tetsuya Sato, Nobuhiro Tanatsugu

*この研究の対応する著者

研究成果: Article査読

6 被引用数 (Scopus)

抄録

A feasibility study of three-dimensionally fiber-reinforced carbon-carbon composites (3D-C/Cs) for application to a turbine disk of ATREX (Air turbo ramjet engine with expander cycle) was carried out. Spin burst tests at room temperature were conducted using 3D-C/C disks, and the fracture behaviors were characterized. A 3D-C/C disk was totally fractured at a peripheral speed of 516 m/s (r = 150 mm), which is sufficient for the ATREX application. However, fiber bundles at the disk periphery prematurely suffered micro-scale damage, and fragments of the fiber bundle unit flew out before total fracture occurred. In order to prevent the fly-out behavior, the disk was impregnated with Si only near its periphery. Although this treatment increased the initiation speed of the fly-out behavior, this improvement was considered insufficient for purposes of the ATREX application. Next, a simplified analysis was conducted to characterize the fly-out behavior. Based on this analysis, the following three measures were discussed: (1) decreasing bundle thickness (i.e. using fine fiber texture), (2) increasing toughness of the fiber bundle interface, and (3) minimizing local curvature in waviness of the fiber bundles in the circumferential direction.

本文言語English
ページ(範囲)205-222
ページ数18
ジャーナルAdvanced Composite Materials: The Official Journal of the Japan Society of Composite Materials
12
2-3
DOI
出版ステータスPublished - 2003 12月 1
外部発表はい

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 材料力学
  • 機械工学

フィンガープリント

「Carbon-carbon composite turbine disk for the air turbo ramjet engine (ATREX)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル