Casting of aluminum alloy ingots for thixoforming using a cooling slope

Toshio Haga*, Shinsuke Suzuki

*この研究の対応する著者

研究成果: Article査読

111 被引用数 (Scopus)

抄録

The present paper examines the casting of ingot for use in thixoforming. Casting of the ingot for thixoforming was attempted by semisolid casting using a cooling slope. It was clarified that the primary crystal became globular when the ingot cast using the cooling slope was remelted into the semisolid state. Casting factors, which affected the sphericity of the primary crystal when the ingots were remelted, were investigated. The cooling rate of the ingot in the mold was found to be the most important factor in making primary crystal globular when the ingot was remelted.

本文言語English
ページ(範囲)169-172
ページ数4
ジャーナルJournal of Materials Processing Technology
118
1-3
DOI
出版ステータスPublished - 2001 12 3
外部発表はい

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • コンピュータ サイエンスの応用
  • 金属および合金
  • 産業および生産工学

フィンガープリント

「Casting of aluminum alloy ingots for thixoforming using a cooling slope」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル