CdTe and CdZnTe detectors for timing measurements

Yuu Okada*, Tadayuki Takahashi, Goro Sato, Shin Watanabe, Kazuhiro Nakazawa, Kunishiro Mori, Kazuo Makishima

*この研究の対応する著者

    研究成果: Conference contribution

    4 被引用数 (Scopus)

    抄録

    We report the timing properties of CdTe and CdZnTe detectors in planar configuration. By utilizing 241Am doped scintilator, we have developed a new method to evaluate the timing performance of the semiconductor detector. We confirm that the slow mobility and short life time of holes significantly degrades the timing performance. To achieve high carrier speed, either by applying a high electric field or by selecting only electrons, is very important for obtaining a detector with fast, ∼ nsec timing capability. To select only the electron events, we adopt the pulse height selection with a fast-slow shaping amplifier. In conjunction with a newly developed CdTe diode, we obtain a superior performance of 5.8 nsec. We also discuss the application for Positron Emission Tomography with 511 keV gamma-gamma coincidence method, and found that a geometrical arrangement in which electrodes are parallel to the incident γ-rays gives about 3 time better timing response than is available when the electrodes are perpendicular to the γ-ray beam.

    本文言語English
    ホスト出版物のタイトルIEEE Nuclear Science Symposium and Medical Imaging Conference
    ページ2429-2433
    ページ数5
    4
    出版ステータスPublished - 2002
    イベント2001 IEEE Nuclear Science Symposium Conference Record - San Diego, CA
    継続期間: 2001 11 42001 11 10

    Other

    Other2001 IEEE Nuclear Science Symposium Conference Record
    CitySan Diego, CA
    Period01/11/401/11/10

    ASJC Scopus subject areas

    • コンピュータ ビジョンおよびパターン認識
    • 産業および生産工学

    フィンガープリント

    「CdTe and CdZnTe detectors for timing measurements」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル