Chemical Emission Rates from Building Materials Measured by a Small Chamber

Rika Funaki, Shin Ichi Tanabe

研究成果: Article

28 引用 (Scopus)

抜粋

A small-scale chamber, ADPAC, was developed to measure chemical emission rates from building materials. Measurement results from wall covering adhesive, flooring, and insulation materials were shown in this paper. The test pieces with wall covering adhesives were produced at the day of measurement. First measurement was conducted 15 hours after the production of the test piece, when chemical concentration in the chamber was considered to be steady state. Measurements were repeated after 4, 7, 14, and 28 days. It was found that emission of formaldehyde was observed even for the product indicated of “non-formalin”. Emission rates were higher during the first day, but decreased rapidly after 1 or 2 weeks. Flooring materials and thermal insulation material EPS were also evaluated.

元の言語English
ページ(範囲)93-100
ページ数8
ジャーナルJournal of Asian Architecture and Building Engineering
1
発行部数2
DOI
出版物ステータスPublished - 2002 1 1

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Architecture
  • Cultural Studies
  • Building and Construction
  • Arts and Humanities (miscellaneous)

フィンガープリント Chemical Emission Rates from Building Materials Measured by a Small Chamber' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用