Clogging mechanisms of vortex pumps: Fibrous material motion capture and simulation with a CFD and DEM coupling method

Yamato Imasaka, Kazuyoshi Miyagawa, Hitoshi Kanno, Motohiko Nohmi, Sumio Saito, Miho Isono, Masahito Kawai

    研究成果: Conference contribution

    抄録

    Since wastewater pumps used in sewage systems have a trade-off relationship between non-clogging ability and efficiency, many internal flow and performance estimation studies so far have focused on optimizing both parameters. Here we focus on vortex pumps with a large space that allows foreign matters to pass through inside the casing that are used as sewage pumps. In this paper, using experimental and numerical methods, we clarified clogging mechanism in the pumps using CFD (Computational Fluid Dynamics), Motion Capture and PIV (Particle Image Velocimetry) method. Firstly, since it was difficult to observe the motion of foreign matter in the pumps, a simple experimental apparatus was built to quantify it. Five cylindrical rods were set in a rectangular water passage made of acrylic that has an 80mm*80mm cross section. The motion of strings in the passage was studied with experiments and computations. Strings were chosen as foreign matter because they are comparatively easy to compute and experiment with compared to fabric for example. In the experiments, the motion of strings could be recorded with a high-speed video camera and their motions were quantified with two-dimensional motion capture system. In the computations, the motion of strings was simulated using DEM (Discrete Element Method) in the CFD software STAR-CCM+ by connecting particles with straight lines and coupling CFD with DEM. It is a numerical value method in which the motion and interaction of a large number of disintegrating objects is simulated. Its characteristic is that the point of contact between the particles is included in the equation of motion. Particles are connected by massless rods. These rods transmit force and momentum to each particle. Furthermore, the force between each particle is computed of the interaction between soft-particles and their bonding strength. In order to formulate the contact force between the particles, the spring-dashpot system is used. In addition, the optimal parameters of the DEM particles were obtained by conducting a parameter study. We confirmed that the motion of the strings in the flow direction coincided with at a high precision in the passage. Furthermore, by applying the computational method with the above results, we were able to simulate the motion of strings in a vortex pump. We found that strings were pulled back into the pump by the backflow in the tongue of the pump. This backflow was observed using PIV results, providing experimental confirmation of this mechanism. Moreover, we were able to simulate the motions of fibrous materials in the passage and vortex pump.

    元の言語English
    ホスト出版物のタイトルFluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics
    出版者American Society of Mechanical Engineers (ASME)
    3
    ISBN(電子版)9780791851579
    DOI
    出版物ステータスPublished - 2018 1 1
    イベントASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, FEDSM 2018 - Montreal, Canada
    継続期間: 2018 7 152018 7 20

    Other

    OtherASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, FEDSM 2018
    Canada
    Montreal
    期間18/7/1518/7/20

    Fingerprint

    Finite difference method
    Computational fluid dynamics
    Vortex flow
    Pumps
    Velocity measurement
    Sewage pumps
    Experiments
    High speed cameras
    Video cameras
    Sewage
    Computational methods
    Acrylics
    Equations of motion
    Numerical methods
    Momentum
    Wastewater
    Water

    ASJC Scopus subject areas

    • Mechanical Engineering

    これを引用

    Imasaka, Y., Miyagawa, K., Kanno, H., Nohmi, M., Saito, S., Isono, M., & Kawai, M. (2018). Clogging mechanisms of vortex pumps: Fibrous material motion capture and simulation with a CFD and DEM coupling method. : Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics (巻 3). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/FEDSM2018-83503

    Clogging mechanisms of vortex pumps : Fibrous material motion capture and simulation with a CFD and DEM coupling method. / Imasaka, Yamato; Miyagawa, Kazuyoshi; Kanno, Hitoshi; Nohmi, Motohiko; Saito, Sumio; Isono, Miho; Kawai, Masahito.

    Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. 巻 3 American Society of Mechanical Engineers (ASME), 2018.

    研究成果: Conference contribution

    Imasaka, Y, Miyagawa, K, Kanno, H, Nohmi, M, Saito, S, Isono, M & Kawai, M 2018, Clogging mechanisms of vortex pumps: Fibrous material motion capture and simulation with a CFD and DEM coupling method. : Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. 巻. 3, American Society of Mechanical Engineers (ASME), ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, FEDSM 2018, Montreal, Canada, 18/7/15. https://doi.org/10.1115/FEDSM2018-83503
    Imasaka Y, Miyagawa K, Kanno H, Nohmi M, Saito S, Isono M その他. Clogging mechanisms of vortex pumps: Fibrous material motion capture and simulation with a CFD and DEM coupling method. : Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. 巻 3. American Society of Mechanical Engineers (ASME). 2018 https://doi.org/10.1115/FEDSM2018-83503
    Imasaka, Yamato ; Miyagawa, Kazuyoshi ; Kanno, Hitoshi ; Nohmi, Motohiko ; Saito, Sumio ; Isono, Miho ; Kawai, Masahito. / Clogging mechanisms of vortex pumps : Fibrous material motion capture and simulation with a CFD and DEM coupling method. Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. 巻 3 American Society of Mechanical Engineers (ASME), 2018.
    @inproceedings{16a8f27e08544acfa720bedd4e4f46fc,
    title = "Clogging mechanisms of vortex pumps: Fibrous material motion capture and simulation with a CFD and DEM coupling method",
    abstract = "Since wastewater pumps used in sewage systems have a trade-off relationship between non-clogging ability and efficiency, many internal flow and performance estimation studies so far have focused on optimizing both parameters. Here we focus on vortex pumps with a large space that allows foreign matters to pass through inside the casing that are used as sewage pumps. In this paper, using experimental and numerical methods, we clarified clogging mechanism in the pumps using CFD (Computational Fluid Dynamics), Motion Capture and PIV (Particle Image Velocimetry) method. Firstly, since it was difficult to observe the motion of foreign matter in the pumps, a simple experimental apparatus was built to quantify it. Five cylindrical rods were set in a rectangular water passage made of acrylic that has an 80mm*80mm cross section. The motion of strings in the passage was studied with experiments and computations. Strings were chosen as foreign matter because they are comparatively easy to compute and experiment with compared to fabric for example. In the experiments, the motion of strings could be recorded with a high-speed video camera and their motions were quantified with two-dimensional motion capture system. In the computations, the motion of strings was simulated using DEM (Discrete Element Method) in the CFD software STAR-CCM+ by connecting particles with straight lines and coupling CFD with DEM. It is a numerical value method in which the motion and interaction of a large number of disintegrating objects is simulated. Its characteristic is that the point of contact between the particles is included in the equation of motion. Particles are connected by massless rods. These rods transmit force and momentum to each particle. Furthermore, the force between each particle is computed of the interaction between soft-particles and their bonding strength. In order to formulate the contact force between the particles, the spring-dashpot system is used. In addition, the optimal parameters of the DEM particles were obtained by conducting a parameter study. We confirmed that the motion of the strings in the flow direction coincided with at a high precision in the passage. Furthermore, by applying the computational method with the above results, we were able to simulate the motion of strings in a vortex pump. We found that strings were pulled back into the pump by the backflow in the tongue of the pump. This backflow was observed using PIV results, providing experimental confirmation of this mechanism. Moreover, we were able to simulate the motions of fibrous materials in the passage and vortex pump.",
    author = "Yamato Imasaka and Kazuyoshi Miyagawa and Hitoshi Kanno and Motohiko Nohmi and Sumio Saito and Miho Isono and Masahito Kawai",
    year = "2018",
    month = "1",
    day = "1",
    doi = "10.1115/FEDSM2018-83503",
    language = "English",
    volume = "3",
    booktitle = "Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics",
    publisher = "American Society of Mechanical Engineers (ASME)",

    }

    TY - GEN

    T1 - Clogging mechanisms of vortex pumps

    T2 - Fibrous material motion capture and simulation with a CFD and DEM coupling method

    AU - Imasaka, Yamato

    AU - Miyagawa, Kazuyoshi

    AU - Kanno, Hitoshi

    AU - Nohmi, Motohiko

    AU - Saito, Sumio

    AU - Isono, Miho

    AU - Kawai, Masahito

    PY - 2018/1/1

    Y1 - 2018/1/1

    N2 - Since wastewater pumps used in sewage systems have a trade-off relationship between non-clogging ability and efficiency, many internal flow and performance estimation studies so far have focused on optimizing both parameters. Here we focus on vortex pumps with a large space that allows foreign matters to pass through inside the casing that are used as sewage pumps. In this paper, using experimental and numerical methods, we clarified clogging mechanism in the pumps using CFD (Computational Fluid Dynamics), Motion Capture and PIV (Particle Image Velocimetry) method. Firstly, since it was difficult to observe the motion of foreign matter in the pumps, a simple experimental apparatus was built to quantify it. Five cylindrical rods were set in a rectangular water passage made of acrylic that has an 80mm*80mm cross section. The motion of strings in the passage was studied with experiments and computations. Strings were chosen as foreign matter because they are comparatively easy to compute and experiment with compared to fabric for example. In the experiments, the motion of strings could be recorded with a high-speed video camera and their motions were quantified with two-dimensional motion capture system. In the computations, the motion of strings was simulated using DEM (Discrete Element Method) in the CFD software STAR-CCM+ by connecting particles with straight lines and coupling CFD with DEM. It is a numerical value method in which the motion and interaction of a large number of disintegrating objects is simulated. Its characteristic is that the point of contact between the particles is included in the equation of motion. Particles are connected by massless rods. These rods transmit force and momentum to each particle. Furthermore, the force between each particle is computed of the interaction between soft-particles and their bonding strength. In order to formulate the contact force between the particles, the spring-dashpot system is used. In addition, the optimal parameters of the DEM particles were obtained by conducting a parameter study. We confirmed that the motion of the strings in the flow direction coincided with at a high precision in the passage. Furthermore, by applying the computational method with the above results, we were able to simulate the motion of strings in a vortex pump. We found that strings were pulled back into the pump by the backflow in the tongue of the pump. This backflow was observed using PIV results, providing experimental confirmation of this mechanism. Moreover, we were able to simulate the motions of fibrous materials in the passage and vortex pump.

    AB - Since wastewater pumps used in sewage systems have a trade-off relationship between non-clogging ability and efficiency, many internal flow and performance estimation studies so far have focused on optimizing both parameters. Here we focus on vortex pumps with a large space that allows foreign matters to pass through inside the casing that are used as sewage pumps. In this paper, using experimental and numerical methods, we clarified clogging mechanism in the pumps using CFD (Computational Fluid Dynamics), Motion Capture and PIV (Particle Image Velocimetry) method. Firstly, since it was difficult to observe the motion of foreign matter in the pumps, a simple experimental apparatus was built to quantify it. Five cylindrical rods were set in a rectangular water passage made of acrylic that has an 80mm*80mm cross section. The motion of strings in the passage was studied with experiments and computations. Strings were chosen as foreign matter because they are comparatively easy to compute and experiment with compared to fabric for example. In the experiments, the motion of strings could be recorded with a high-speed video camera and their motions were quantified with two-dimensional motion capture system. In the computations, the motion of strings was simulated using DEM (Discrete Element Method) in the CFD software STAR-CCM+ by connecting particles with straight lines and coupling CFD with DEM. It is a numerical value method in which the motion and interaction of a large number of disintegrating objects is simulated. Its characteristic is that the point of contact between the particles is included in the equation of motion. Particles are connected by massless rods. These rods transmit force and momentum to each particle. Furthermore, the force between each particle is computed of the interaction between soft-particles and their bonding strength. In order to formulate the contact force between the particles, the spring-dashpot system is used. In addition, the optimal parameters of the DEM particles were obtained by conducting a parameter study. We confirmed that the motion of the strings in the flow direction coincided with at a high precision in the passage. Furthermore, by applying the computational method with the above results, we were able to simulate the motion of strings in a vortex pump. We found that strings were pulled back into the pump by the backflow in the tongue of the pump. This backflow was observed using PIV results, providing experimental confirmation of this mechanism. Moreover, we were able to simulate the motions of fibrous materials in the passage and vortex pump.

    UR - http://www.scopus.com/inward/record.url?scp=85056158749&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85056158749&partnerID=8YFLogxK

    U2 - 10.1115/FEDSM2018-83503

    DO - 10.1115/FEDSM2018-83503

    M3 - Conference contribution

    AN - SCOPUS:85056158749

    VL - 3

    BT - Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics

    PB - American Society of Mechanical Engineers (ASME)

    ER -