Columnar Structure in FePt-C Granular Media for Heat-Assisted Magnetic Recording

B. S.D.C.S. Varaprasad, J. Wang, T. Shiroyama, Y. K. Takahashi*, K. Hono

*この研究の対応する著者

研究成果: Article査読

23 被引用数 (Scopus)

抄録

We attempted a compositionally graded sputtering process to overcome the phase separation in the growth direction in the FePt-C granular film in order to realize the columnar structure of FePt grains with an aspect ratio larger than 1.5. In order to overcome the problem of the formation of a second FePt-C layer for the thickness larger than 6 nm, we deposited the FePt-C film by changing the carbon concentration during the sputtering process. The formation of the second FePt-C layer was suppressed, which led to the growth of columnar grains with an aspect ratio of 1.5. The overall volume fraction of carbon is a decisive factor on the size of the FePt grains. Using the compositionally graded process, FePt-C nanogranular films with an average grain size of 7.8 nm, a thickness of 10 nm, and a perpendicular coercivity of 40 kOe were obtained.

本文言語English
論文番号7117424
ジャーナルIEEE Transactions on Magnetics
51
11
DOI
出版ステータスPublished - 2015 11 1
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 電子工学および電気工学

フィンガープリント

「Columnar Structure in FePt-C Granular Media for Heat-Assisted Magnetic Recording」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル