Continuous and regulated organic micro bubble generation using lumped gas and organic injected junction

Takahiro Yamamoto, Takahiro Arakawa, Shuichi Shoji

研究成果: Conference contribution

抄録

Continuous and regulated micro bubble generation system was realized in a water now microchannel including a lumped gas and organic injection junction. The idea was originated in the soap bubble formation. The diameter and thickness of organic micro bubble were well controlled by the flow rates of water and organic respectively. The controllable diameter of the bubble was ranged from 110 μm to 220 μm, while its thickness from 4 μm to 16 μm. The generation rate is mainly dependant on the water flow rate. The organic phase membrane is useful for the chemical reaction media. The organic bubbles are expected to be used as capsules of reactive gas handling.

本文言語English
ホスト出版物のタイトルProceedings - CIS Workshops 2007, 2007 International Conference on Computational Intelligence and Security Workshops, CISW 2007
ページ553-556
ページ数4
出版ステータスPublished - 2007 12 1
イベント20th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2007 - Kobe, Japan
継続期間: 2007 1 212007 1 25

出版物シリーズ

名前Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
ISSN(印刷版)1084-6999

Conference

Conference20th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2007
国/地域Japan
CityKobe
Period07/1/2107/1/25

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「Continuous and regulated organic micro bubble generation using lumped gas and organic injected junction」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル