Control of adsorbates and conduction on CVD-grown diamond surface, using scanning probe microscope

Minoru Tachiki, Tohru Fukuda, Kenta Sugata, Hokuto Seo, Hitoshi Umezawa, Hiroshi Kawarada

    研究成果: Article

    38 引用 (Scopus)

    抄録

    Nanofabrication on a hydrogen-terminated diamond surface is performed by controlling surface adsorbates, using a scanning probe microscope (SPM) technique. Insulated areas are successfully obtained by changing hydrogen termination to oxygen termination. The Auger electron spectrum (AES) indicated the presence of oxygen adsorbed on the modified surface area. A small isolated conductive area is fabricated, and using this structure, a metal-insulator-metal (MIM) diode-like I-V characteristic is observed. Anodic oxidation using the surface water is also suggested for our experimental results.

    元の言語English
    ページ(範囲)578-582
    ページ数5
    ジャーナルApplied Surface Science
    159
    DOI
    出版物ステータスPublished - 2000 6

    Fingerprint

    Diamond
    Adsorbates
    Chemical vapor deposition
    Diamonds
    Microscopes
    diamonds
    microscopes
    vapor deposition
    Scanning
    conduction
    scanning
    probes
    Hydrogen
    MIM diodes
    Metals
    Oxygen
    nanofabrication
    Anodic oxidation
    oxygen
    hydrogen

    ASJC Scopus subject areas

    • Physical and Theoretical Chemistry
    • Surfaces, Coatings and Films
    • Condensed Matter Physics

    これを引用

    Control of adsorbates and conduction on CVD-grown diamond surface, using scanning probe microscope. / Tachiki, Minoru; Fukuda, Tohru; Sugata, Kenta; Seo, Hokuto; Umezawa, Hitoshi; Kawarada, Hiroshi.

    :: Applied Surface Science, 巻 159, 06.2000, p. 578-582.

    研究成果: Article

    Tachiki, Minoru ; Fukuda, Tohru ; Sugata, Kenta ; Seo, Hokuto ; Umezawa, Hitoshi ; Kawarada, Hiroshi. / Control of adsorbates and conduction on CVD-grown diamond surface, using scanning probe microscope. :: Applied Surface Science. 2000 ; 巻 159. pp. 578-582.
    @article{3d5891afb879438bb56b43208381c306,
    title = "Control of adsorbates and conduction on CVD-grown diamond surface, using scanning probe microscope",
    abstract = "Nanofabrication on a hydrogen-terminated diamond surface is performed by controlling surface adsorbates, using a scanning probe microscope (SPM) technique. Insulated areas are successfully obtained by changing hydrogen termination to oxygen termination. The Auger electron spectrum (AES) indicated the presence of oxygen adsorbed on the modified surface area. A small isolated conductive area is fabricated, and using this structure, a metal-insulator-metal (MIM) diode-like I-V characteristic is observed. Anodic oxidation using the surface water is also suggested for our experimental results.",
    author = "Minoru Tachiki and Tohru Fukuda and Kenta Sugata and Hokuto Seo and Hitoshi Umezawa and Hiroshi Kawarada",
    year = "2000",
    month = "6",
    doi = "10.1016/S0169-4332(00)00149-5",
    language = "English",
    volume = "159",
    pages = "578--582",
    journal = "Applied Surface Science",
    issn = "0169-4332",
    publisher = "Elsevier",

    }

    TY - JOUR

    T1 - Control of adsorbates and conduction on CVD-grown diamond surface, using scanning probe microscope

    AU - Tachiki, Minoru

    AU - Fukuda, Tohru

    AU - Sugata, Kenta

    AU - Seo, Hokuto

    AU - Umezawa, Hitoshi

    AU - Kawarada, Hiroshi

    PY - 2000/6

    Y1 - 2000/6

    N2 - Nanofabrication on a hydrogen-terminated diamond surface is performed by controlling surface adsorbates, using a scanning probe microscope (SPM) technique. Insulated areas are successfully obtained by changing hydrogen termination to oxygen termination. The Auger electron spectrum (AES) indicated the presence of oxygen adsorbed on the modified surface area. A small isolated conductive area is fabricated, and using this structure, a metal-insulator-metal (MIM) diode-like I-V characteristic is observed. Anodic oxidation using the surface water is also suggested for our experimental results.

    AB - Nanofabrication on a hydrogen-terminated diamond surface is performed by controlling surface adsorbates, using a scanning probe microscope (SPM) technique. Insulated areas are successfully obtained by changing hydrogen termination to oxygen termination. The Auger electron spectrum (AES) indicated the presence of oxygen adsorbed on the modified surface area. A small isolated conductive area is fabricated, and using this structure, a metal-insulator-metal (MIM) diode-like I-V characteristic is observed. Anodic oxidation using the surface water is also suggested for our experimental results.

    UR - http://www.scopus.com/inward/record.url?scp=0034205944&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0034205944&partnerID=8YFLogxK

    U2 - 10.1016/S0169-4332(00)00149-5

    DO - 10.1016/S0169-4332(00)00149-5

    M3 - Article

    AN - SCOPUS:0034205944

    VL - 159

    SP - 578

    EP - 582

    JO - Applied Surface Science

    JF - Applied Surface Science

    SN - 0169-4332

    ER -