Control system for the seismic attenuation system (SAS) in TAMA300

K. Agatsuma*, R. Takahashi, K. Arai, D. Tatsumi, Mitsuhiro Fukushima, T. Yamazaki, K. Fujimoto, Y. Arase, N. Nakagawa, A. Takamori, K. Tsubono, K. Kuroda, M. Ohashi, R. Desalvo, A. Bertolini, S. Márka, V. Sannibale

*この研究の対応する著者

研究成果: Article査読

3 被引用数 (Scopus)

抄録

A new seismic isolation system, TAMA Seismic Attenuation System (TAMA-SAS), was installed to TAMA300 in order to improve the sensitivity at low frequencies. Inertial damping is one of the hierarchical control systems of the TAMA-SAS which are employed to give full play to its ability. We have established two servo loops to control the Inverted Pendulum (IP) which composes the SAS. One is the servo loop using LVDT position sensors to keep the position of the IP. The other is the inertial damping which uses accelerometers to control the inertial motion of the IP for the horizontal direction. The fluctuation of the IP was reduced using our servo system. In addition, reduction of angular and longitudinal fluctuation of the mirror was also confirmed. These results indicate that the control for the IP properly works and the isolation performance of the TAMA-SAS was improved.

本文言語English
論文番号012013
ジャーナルJournal of Physics: Conference Series
122
DOI
出版ステータスPublished - 2008
外部発表はい

ASJC Scopus subject areas

  • 物理学および天文学(全般)

フィンガープリント

「Control system for the seismic attenuation system (SAS) in TAMA300」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル