Controlling factors of pearlite transformation rate of 0.4 mass% C steels

Takako Yamashita, Tetsu Narutani, Yoshiyuki Saito

    研究成果: Article査読

    抄録

    Kinetics of austenite to pearlite phase transformation in 0.4mass%C-X (X = Cr, Ni) steels were investigated. The isothermal transformation curves were analyzed with of the Avrami Equation: X(t)= 1-exp(-Gtn) where X(t) is the fraction transformed and n and G are constants. The exponents n were found to be about 2 except for Cr steels. The value of n for steels containing 0.5 and 1.0 mass% Cr were about 3. This results indicated that the pearlite transformation in 0.4 mass% C steels in present study is controlled by the site saturation mechanism. The parameters G, transformation rate constant of pearlite, were independent of the supercooling from A1 temperature and the driving force of pearlite transformation. These values were dependent on the energy differences of ferrite phase from supercooled austenite phase. This energy difference was equivalent to the driving force of eutectoid ferrite. The predicted transformation rate of pearlite is independent of transformation temperature and containing alloy. The pearlite transformation rate of 0.4 mass% C steels was found to be controlled by eutectoid ferrite growth.

    本文言語English
    ページ(範囲)458-465
    ページ数8
    ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    86
    7
    出版ステータスPublished - 2000 7

    ASJC Scopus subject areas

    • Metals and Alloys

    フィンガープリント 「Controlling factors of pearlite transformation rate of 0.4 mass% C steels」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル