Core design study of super FBR with multi-axial fuel shuffling and different coolant density

Shogo Noda, Sukarman Sukarman, Akifumi Yamaji, Tetsuo Takei, Takanari Fukuda, Arisa Ayukawa

    研究成果: Conference contribution

    抄録

    The Super Fast Breeder Reactor (Super FBR) utilizes supercritical light water as coolant, which changes from liquid-like high density state to gas-like low density state continuously in the core without phase change. In the preceding study (Noda et al., 2017), new concept of axially heterogeneous core with multi-axial fuel shuffling was proposed. The core consisted of two layers of mixed oxide (MOX) fuel and two layers of blanket fuel with depleted uranium (DU), which were arranged alternatively in the axial direction. The study showed that, with independent fuel shuffling in the upper part and lower part of the core, breeding performance could be improved by increasing the upper blanket fuel batch number while keeping the fuel batch number of the rest of the core unchanged, because of increased neutron flux in the upper blanket. However, the study did not consider influence of different coolant density histories in the different axial level of the core on the core neutronics. Hence, this study aims to reveal influence of the different coolant density histories through design and analyses of the multi-axial fuel shuffling core with two MOX layers and three blanket layers. The three levels correspond to the coolant density below, around, and above the pseudo-critical temperature. The neutronics calculations are carried out with SRAC 2006 code and JENDL-3.3 nuclear data library. Unit cell burnup calculations based on collision probability method are carried out for 5 different coolant density histories to consider influence of different neutron spectrum on breeding performance of the core. Influence of instantaneous coolant density changes on the core neutronics are considered by coupling core burnup calculations with thermal-hydraulics calculations based on single channel model. Influence of independent fuel shuffling of the upper blanket on the core neutronics (breeding performance and void reactivity characteristics) is investigated, followed by a similar investigation on the lower blanket. The differences between the two schemes are investigated since coolant density histories are greatly different between the upper blanket and the lower blanket.

    元の言語English
    ホスト出版物のタイトルAdvanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues
    出版者American Society of Mechanical Engineers (ASME)
    5
    ISBN(印刷物)9784888982566
    DOI
    出版物ステータスPublished - 2018 1 1
    イベント2018 26th International Conference on Nuclear Engineering, ICONE 2018 - London, United Kingdom
    継続期間: 2018 7 222018 7 26

    Other

    Other2018 26th International Conference on Nuclear Engineering, ICONE 2018
    United Kingdom
    London
    期間18/7/2218/7/26

    Fingerprint

    Coolants
    Mixed oxide fuels
    Breeder reactors
    Neutron flux
    Uranium
    Neutrons
    Hydraulics
    Oxides
    Liquids
    Gases
    Water

    ASJC Scopus subject areas

    • Nuclear Energy and Engineering

    これを引用

    Noda, S., Sukarman, S., Yamaji, A., Takei, T., Fukuda, T., & Ayukawa, A. (2018). Core design study of super FBR with multi-axial fuel shuffling and different coolant density. : Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues (巻 5). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/ICONE26-81501

    Core design study of super FBR with multi-axial fuel shuffling and different coolant density. / Noda, Shogo; Sukarman, Sukarman; Yamaji, Akifumi; Takei, Tetsuo; Fukuda, Takanari; Ayukawa, Arisa.

    Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues. 巻 5 American Society of Mechanical Engineers (ASME), 2018.

    研究成果: Conference contribution

    Noda, S, Sukarman, S, Yamaji, A, Takei, T, Fukuda, T & Ayukawa, A 2018, Core design study of super FBR with multi-axial fuel shuffling and different coolant density. : Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues. 巻. 5, American Society of Mechanical Engineers (ASME), 2018 26th International Conference on Nuclear Engineering, ICONE 2018, London, United Kingdom, 18/7/22. https://doi.org/10.1115/ICONE26-81501
    Noda S, Sukarman S, Yamaji A, Takei T, Fukuda T, Ayukawa A. Core design study of super FBR with multi-axial fuel shuffling and different coolant density. : Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues. 巻 5. American Society of Mechanical Engineers (ASME). 2018 https://doi.org/10.1115/ICONE26-81501
    Noda, Shogo ; Sukarman, Sukarman ; Yamaji, Akifumi ; Takei, Tetsuo ; Fukuda, Takanari ; Ayukawa, Arisa. / Core design study of super FBR with multi-axial fuel shuffling and different coolant density. Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues. 巻 5 American Society of Mechanical Engineers (ASME), 2018.
    @inproceedings{4017e596917646d7a4685db5f2dd14e5,
    title = "Core design study of super FBR with multi-axial fuel shuffling and different coolant density",
    abstract = "The Super Fast Breeder Reactor (Super FBR) utilizes supercritical light water as coolant, which changes from liquid-like high density state to gas-like low density state continuously in the core without phase change. In the preceding study (Noda et al., 2017), new concept of axially heterogeneous core with multi-axial fuel shuffling was proposed. The core consisted of two layers of mixed oxide (MOX) fuel and two layers of blanket fuel with depleted uranium (DU), which were arranged alternatively in the axial direction. The study showed that, with independent fuel shuffling in the upper part and lower part of the core, breeding performance could be improved by increasing the upper blanket fuel batch number while keeping the fuel batch number of the rest of the core unchanged, because of increased neutron flux in the upper blanket. However, the study did not consider influence of different coolant density histories in the different axial level of the core on the core neutronics. Hence, this study aims to reveal influence of the different coolant density histories through design and analyses of the multi-axial fuel shuffling core with two MOX layers and three blanket layers. The three levels correspond to the coolant density below, around, and above the pseudo-critical temperature. The neutronics calculations are carried out with SRAC 2006 code and JENDL-3.3 nuclear data library. Unit cell burnup calculations based on collision probability method are carried out for 5 different coolant density histories to consider influence of different neutron spectrum on breeding performance of the core. Influence of instantaneous coolant density changes on the core neutronics are considered by coupling core burnup calculations with thermal-hydraulics calculations based on single channel model. Influence of independent fuel shuffling of the upper blanket on the core neutronics (breeding performance and void reactivity characteristics) is investigated, followed by a similar investigation on the lower blanket. The differences between the two schemes are investigated since coolant density histories are greatly different between the upper blanket and the lower blanket.",
    author = "Shogo Noda and Sukarman Sukarman and Akifumi Yamaji and Tetsuo Takei and Takanari Fukuda and Arisa Ayukawa",
    year = "2018",
    month = "1",
    day = "1",
    doi = "10.1115/ICONE26-81501",
    language = "English",
    isbn = "9784888982566",
    volume = "5",
    booktitle = "Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues",
    publisher = "American Society of Mechanical Engineers (ASME)",

    }

    TY - GEN

    T1 - Core design study of super FBR with multi-axial fuel shuffling and different coolant density

    AU - Noda, Shogo

    AU - Sukarman, Sukarman

    AU - Yamaji, Akifumi

    AU - Takei, Tetsuo

    AU - Fukuda, Takanari

    AU - Ayukawa, Arisa

    PY - 2018/1/1

    Y1 - 2018/1/1

    N2 - The Super Fast Breeder Reactor (Super FBR) utilizes supercritical light water as coolant, which changes from liquid-like high density state to gas-like low density state continuously in the core without phase change. In the preceding study (Noda et al., 2017), new concept of axially heterogeneous core with multi-axial fuel shuffling was proposed. The core consisted of two layers of mixed oxide (MOX) fuel and two layers of blanket fuel with depleted uranium (DU), which were arranged alternatively in the axial direction. The study showed that, with independent fuel shuffling in the upper part and lower part of the core, breeding performance could be improved by increasing the upper blanket fuel batch number while keeping the fuel batch number of the rest of the core unchanged, because of increased neutron flux in the upper blanket. However, the study did not consider influence of different coolant density histories in the different axial level of the core on the core neutronics. Hence, this study aims to reveal influence of the different coolant density histories through design and analyses of the multi-axial fuel shuffling core with two MOX layers and three blanket layers. The three levels correspond to the coolant density below, around, and above the pseudo-critical temperature. The neutronics calculations are carried out with SRAC 2006 code and JENDL-3.3 nuclear data library. Unit cell burnup calculations based on collision probability method are carried out for 5 different coolant density histories to consider influence of different neutron spectrum on breeding performance of the core. Influence of instantaneous coolant density changes on the core neutronics are considered by coupling core burnup calculations with thermal-hydraulics calculations based on single channel model. Influence of independent fuel shuffling of the upper blanket on the core neutronics (breeding performance and void reactivity characteristics) is investigated, followed by a similar investigation on the lower blanket. The differences between the two schemes are investigated since coolant density histories are greatly different between the upper blanket and the lower blanket.

    AB - The Super Fast Breeder Reactor (Super FBR) utilizes supercritical light water as coolant, which changes from liquid-like high density state to gas-like low density state continuously in the core without phase change. In the preceding study (Noda et al., 2017), new concept of axially heterogeneous core with multi-axial fuel shuffling was proposed. The core consisted of two layers of mixed oxide (MOX) fuel and two layers of blanket fuel with depleted uranium (DU), which were arranged alternatively in the axial direction. The study showed that, with independent fuel shuffling in the upper part and lower part of the core, breeding performance could be improved by increasing the upper blanket fuel batch number while keeping the fuel batch number of the rest of the core unchanged, because of increased neutron flux in the upper blanket. However, the study did not consider influence of different coolant density histories in the different axial level of the core on the core neutronics. Hence, this study aims to reveal influence of the different coolant density histories through design and analyses of the multi-axial fuel shuffling core with two MOX layers and three blanket layers. The three levels correspond to the coolant density below, around, and above the pseudo-critical temperature. The neutronics calculations are carried out with SRAC 2006 code and JENDL-3.3 nuclear data library. Unit cell burnup calculations based on collision probability method are carried out for 5 different coolant density histories to consider influence of different neutron spectrum on breeding performance of the core. Influence of instantaneous coolant density changes on the core neutronics are considered by coupling core burnup calculations with thermal-hydraulics calculations based on single channel model. Influence of independent fuel shuffling of the upper blanket on the core neutronics (breeding performance and void reactivity characteristics) is investigated, followed by a similar investigation on the lower blanket. The differences between the two schemes are investigated since coolant density histories are greatly different between the upper blanket and the lower blanket.

    UR - http://www.scopus.com/inward/record.url?scp=85056168348&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85056168348&partnerID=8YFLogxK

    U2 - 10.1115/ICONE26-81501

    DO - 10.1115/ICONE26-81501

    M3 - Conference contribution

    SN - 9784888982566

    VL - 5

    BT - Advanced Reactors and Fusion Technologies; Codes, Standards, Licensing, and Regulatory Issues

    PB - American Society of Mechanical Engineers (ASME)

    ER -