CO2 capture system using lithium silicate for distributed power supply

Mamoru Mizunuma*, Masayuki Tsuda, Yasuko Y. Maruo, Takao Nakagaki

*この研究の対応する著者

研究成果: Conference article査読

17 被引用数 (Scopus)

抄録

Distributed power-supply systems have become more widespread recently. Recent distributed systems, such as fuel cells, offer high energy-use efficiency because they generate heat or hot water and electric power simultaneously. However, to avoid global warming, carbon dioxide (CO2) from the exhaust gas has to be collected and separated, without emitting it to the atmosphere. We are investigating lithium silicate (Li4SiO 4) (LS) because it has superior characteristics as a CO2 absorber. Aiming at the construction of a CO2 capture and separation system using LS, we are studying ways to process (capture and separate) the exhaust gas from distributed power-supply systems. We thought that the CO 2 capture and separate system we should design must process exhaust gases with 30% CO2 concentration and 35 L/min flow rate and that it must capture and separate more than 50% of the CO2 contained in the exhaust gases. However, as a result of a preliminary estimation, it became clear that the volume of the assumed CO2 capture and separate system would be considerable. Therefore, we built a reduction model experimental setup with three reaction containers with three different aspect ratios. The results regarding container shape suggest that a long container would be advantageous..

本文言語English
ページ(範囲)1194-1201
ページ数8
ジャーナルEnergy Procedia
37
DOI
出版ステータスPublished - 2013
イベント11th International Conference on Greenhouse Gas Control Technologies, GHGT 2012 - Kyoto, Japan
継続期間: 2012 11 182012 11 22

ASJC Scopus subject areas

  • エネルギー(全般)

フィンガープリント

「CO<sub>2</sub> capture system using lithium silicate for distributed power supply」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル