Criteria of solidification cracking of Al-Mg and Al-Si alloys by acoustic emission method

Akira Matsushita*, Itaru Endo, Makoto Yoshida

*この研究の対応する著者

研究成果: Article査読

抄録

Detection of solidification cracking of JIS AC7A aluminum alloy and Al-7%Si alloy was attempted by using acoustic emission method. In order to detect AE of solidification cracking, we investigated about AE signals of gas porosity, shrinkage cavity, and fracture in the semi-solid tensile test. The frequency bands of these casting defects were 150 kHz or less, so the source characterization of AE signals were difficult by that. Therefore we discussed and suggested value of integrated AE peak volt as an indicator of crack initiation. As a result, we proved value of time integral (IAP) is beneficial for eutectic alloy and value of temperature integral (TIAP) is beneficial for noneutectic alloy. We also suggested value of time temperature integral (DIAP) as the criterion of crack initiation which is beneficial for eutectic and non-eutectic alloy.

本文言語English
ページ(範囲)104-108
ページ数5
ジャーナルKeikinzoku/Journal of Japan Institute of Light Metals
62
3
DOI
出版ステータスPublished - 2012

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Criteria of solidification cracking of Al-Mg and Al-Si alloys by acoustic emission method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル