Design of distribution network using power flow controller

    研究成果: Article

    抄録

    We consider the design of distribution network using power flow controller. In power delivery systems, the use of dispersed generation and security control to improve network utilization requires the optimal use of system control devices. The installation of loop controller allows the distribution system to operate in a loop configuration, achieving effective management of voltage and power flow. In the investment planning process, it is important to identify the optimal location and installed capacity of the equipment such that all operational constraints are satisfied. This paper presents a method for identifying the optimal location and capacity with the minimum installation cost. Our novel approach uses an economic model that considers the fixed costs. A slope scaling procedure is presented, and its efficiency is demonstrated using numerical experiments.

    元の言語English
    ジャーナルJournal of Advanced Mechanical Design, Systems and Manufacturing
    12
    発行部数3
    DOI
    出版物ステータスPublished - 2018 1 1

    Fingerprint

    Electric power distribution
    Controllers
    Costs
    Control systems
    Planning
    Economics
    Electric potential
    Experiments

    ASJC Scopus subject areas

    • Mechanical Engineering
    • Industrial and Manufacturing Engineering

    これを引用

    @article{92fb21f8872e46e0ada3aab4af3f65d7,
    title = "Design of distribution network using power flow controller",
    abstract = "We consider the design of distribution network using power flow controller. In power delivery systems, the use of dispersed generation and security control to improve network utilization requires the optimal use of system control devices. The installation of loop controller allows the distribution system to operate in a loop configuration, achieving effective management of voltage and power flow. In the investment planning process, it is important to identify the optimal location and installed capacity of the equipment such that all operational constraints are satisfied. This paper presents a method for identifying the optimal location and capacity with the minimum installation cost. Our novel approach uses an economic model that considers the fixed costs. A slope scaling procedure is presented, and its efficiency is demonstrated using numerical experiments.",
    keywords = "Dynamic slope scaling, Ingeter programming, Nonlinear programming, Optimal power flow",
    author = "Takayuki Shiina",
    year = "2018",
    month = "1",
    day = "1",
    doi = "10.1299/jamdsm.2018jamdsm0068",
    language = "English",
    volume = "12",
    journal = "Journal of Advanced Mechanical Design, Systems and Manufacturing",
    issn = "1881-3054",
    publisher = "Japan Society of Mechanical Engineers",
    number = "3",

    }

    TY - JOUR

    T1 - Design of distribution network using power flow controller

    AU - Shiina, Takayuki

    PY - 2018/1/1

    Y1 - 2018/1/1

    N2 - We consider the design of distribution network using power flow controller. In power delivery systems, the use of dispersed generation and security control to improve network utilization requires the optimal use of system control devices. The installation of loop controller allows the distribution system to operate in a loop configuration, achieving effective management of voltage and power flow. In the investment planning process, it is important to identify the optimal location and installed capacity of the equipment such that all operational constraints are satisfied. This paper presents a method for identifying the optimal location and capacity with the minimum installation cost. Our novel approach uses an economic model that considers the fixed costs. A slope scaling procedure is presented, and its efficiency is demonstrated using numerical experiments.

    AB - We consider the design of distribution network using power flow controller. In power delivery systems, the use of dispersed generation and security control to improve network utilization requires the optimal use of system control devices. The installation of loop controller allows the distribution system to operate in a loop configuration, achieving effective management of voltage and power flow. In the investment planning process, it is important to identify the optimal location and installed capacity of the equipment such that all operational constraints are satisfied. This paper presents a method for identifying the optimal location and capacity with the minimum installation cost. Our novel approach uses an economic model that considers the fixed costs. A slope scaling procedure is presented, and its efficiency is demonstrated using numerical experiments.

    KW - Dynamic slope scaling

    KW - Ingeter programming

    KW - Nonlinear programming

    KW - Optimal power flow

    UR - http://www.scopus.com/inward/record.url?scp=85051444773&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85051444773&partnerID=8YFLogxK

    U2 - 10.1299/jamdsm.2018jamdsm0068

    DO - 10.1299/jamdsm.2018jamdsm0068

    M3 - Article

    AN - SCOPUS:85051444773

    VL - 12

    JO - Journal of Advanced Mechanical Design, Systems and Manufacturing

    JF - Journal of Advanced Mechanical Design, Systems and Manufacturing

    SN - 1881-3054

    IS - 3

    ER -