Detection of solidification cracking of Al-7mass%Si alloy by using acoustic emission and visualization methods

Itaru Endo*, Hiroyuki Chiba, Toru Ueki, Takanari Toriyama, Makoto Yoshida

*この研究の対応する著者

研究成果: Article査読

抄録

Detection of AE signals of solidification cracking of Al-7mass%Si alloy was attempted with in situ microscopic observation on the surface of casting using high speed camera. During solidification, it was found that AE signal from the casting with crack was higher than AE signal from the casting without crack. As a result of observation of casting using high speed camera, it was found that a rise of AE signal corresponded to initiation of solidification cracking. This stage was the stage of eutectic solidification. Thus, AE signals of solidification cracking should be generated during eutectic solidification. However, AE signals from the casting without cracking were also detected during solidification. This means that AE signals other than solidification cracking should be generated during solidification. Therefore, AE signals detected during eutectic solidification is not necessarily AE signals of solidification cracking. In order to detect AE signals of solidification cracking, it is necessary to separate AE signals of solidification cracking and other than solidification cracking.

本文言語English
ページ(範囲)486-491
ページ数6
ジャーナルKeikinzoku/Journal of Japan Institute of Light Metals
60
10
DOI
出版ステータスPublished - 2010

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Detection of solidification cracking of Al-7mass%Si alloy by using acoustic emission and visualization methods」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル