Determination method for loss minimum configuration considering reconnection of distributed generators

Hirotaka Takano, Takafumi Tomida, Yasuhiro Hayashi, Junya Matsuki

研究成果: Article

抜粋

In the field of electrical power system, various approaches, such as utilization of renewable energy, loss reduction, and so on, have been taken to reduce CO 2 emission. So as to work toward this goal, the total number of distributed generators (DGs) using renewable energy connected into 6.6 kV distribution system has been increasing rapidly. The DGs can reduce distribution loss by appropriate allocation. However, when a fault occurs such as distribution line fault and bank fault, DGs connecting outage sections are disconnected simultaneously. Since the simultaneous disconnection of DGs influences restoration configuration and normal configuration after the restoration, it is necessary to determine the system configuration in normal state considering simultaneous disconnection of DGs. In this paper, the authors propose a computation method to determine the loss minimum configuration in normal state considering reconnection of DGs after simultaneous disconnection by fault occurrence. The feature of determined loss minimum configuration is satisfying with operational constraints even if all DGs are disconnected from the system. Numerical simulations are carried out for a real scale distribution system model with 252 sectionalizing switches (configuration candidates are 2 252) and 120 DGs (total output is 38.46 MW which is 23% of total load) in order to examine the validity of the proposed algorithm.

元の言語English
ページ(範囲)324-330+9
ジャーナルIEEJ Transactions on Power and Energy
129
発行部数2
DOI
出版物ステータスPublished - 2009 12 1
外部発表Yes

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

フィンガープリント Determination method for loss minimum configuration considering reconnection of distributed generators' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用