Determination of melt pool dimensions using DOE-FEM and RSM with process window during SLM of Ti6Al4V powder

Jyun Rong Zhuang, Yee Ting Lee, Wen Hsin Hsieh, An Shik Yang*

*この研究の対応する著者

研究成果: Article査読

46 被引用数 (Scopus)

抄録

Selective laser melting (SLM) shows a positive prospect as an additive manufacturing (AM) technique for fabrication of 3D parts with complicated structures. A transient thermal model was developed by the finite element method (FEM) to simulate the thermal behavior for predicting the time evolution of temperature field and melt pool dimensions of Ti6Al4V powder during SLM. The FEM predictions were then compared with published experimental measurements and calculation results for model validation. This study applied the design of experiment (DOE) scheme together with the response surface method (RSM) to conduct the regression analysis based on four processing parameters (exactly, the laser power, scanning speed, preheating temperature and hatch space) for predicting the dimensions of the melt pool in SLM. The preliminary RSM results were used to quantify the effects of those parameters on the melt pool size. The process window was further implemented via two criteria of the width and depth of the molten pool to screen impractical conditions of four parameters for including the practical ranges of processing parameters. The FEM simulations confirmed the good accuracy of the critical RSM models in the predictions of melt pool dimensions for three typical SLM working scenarios.

本文言語English
ページ(範囲)59-76
ページ数18
ジャーナルOptics and Laser Technology
103
DOI
出版ステータスPublished - 2018 7月 1

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 原子分子物理学および光学
  • 電子工学および電気工学

フィンガープリント

「Determination of melt pool dimensions using DOE-FEM and RSM with process window during SLM of Ti6Al4V powder」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル