Developing oscillatory flow in a strongly curved tube

Takeshi Naruse*, Yoshihiro Nishina, Sachiko Kugenuma, Kazuo Tanishita

*この研究の対応する著者

研究成果: Article査読

5 被引用数 (Scopus)

抄録

Laser Doppler velocity measurements were performed on developing oscillatory flow in a strongly curved tube, in which a curvature ratio, a/R (defined as the ratio of the tube radius to the radius of curvature) of 1/2 was achieved. At the Womersley number of 4.5, curvature effects enhanced the secondary flow and maximum secondary flow velocity increased to 60% of the amplitude of the cross-sectional averaged axial velocity in the curved tube of a/R = 1/2 . On the other hand, for a larger Womersley number (=18), the velocity at the edge of the boundary layer at the inner wall significantly increased just downstream of the entrance due to the formation of potential vortex, which is strongly dependent on large curvature effect.

本文言語English
ページ(範囲)2562-2569
ページ数8
ジャーナルNippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
56
529
出版ステータスPublished - 1990 9月

ASJC Scopus subject areas

  • 機械工学

フィンガープリント

「Developing oscillatory flow in a strongly curved tube」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル