Development of a plasma separation system for a portable blood test device

Chiaki Kuroda, Yoshimichi Ohki, Hiroki Ashiba, Makoto Fujimaki, Koichi Awazu, Torahiko Tanaka, Makoto Makishima

    研究成果: Article

    1 引用 (Scopus)

    抜粋

    Aiming at developing a portable and speedy blood test device, a microfluidic system is designed and developed. Blood is injected into a hole with a diameter of 3.0 mm and a height of 3.0 mm. When the blood sample is transported from the bottom to the top of the hole, blood cells sediment at the bottom and plasma is separated at the upper side. Using this system, approximately 1 μL pure plasma can be obtained when blood is injected at a flow rate of 0.70 μL/min for 15 minutes. Moreover, by retaining the blood in the hole for seven minutes, pure plasma can be obtained 11 minutes later.

    元の言語English
    ページ(範囲)152-157
    ページ数6
    ジャーナルIEEJ Transactions on Sensors and Micromachines
    135
    発行部数5
    DOI
    出版物ステータスPublished - 2015 5 1

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Mechanical Engineering

    フィンガープリント Development of a plasma separation system for a portable blood test device' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用