Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel

Hiroki Watanabe, Kazuki Kanou, Yo Kobayashi, Masakatsu G. Fujie

研究成果: Conference contribution

14 引用 (Scopus)

抄録

It is often difficult for orthopedic surgeons to avoid LCL injury during ACL reconstruction. In this paper, we developed a steerable drill for ACL reconstruction to avoid LCL injury in the process of making a bone tunnel. There are two special requirements for the steerable drill mechanism. One is having sufficient flexibility to bend and avoid LCL while cutting the bone. The other is rigidity to avoid the buckle at the base of the drill when external force is exerted on the drill tip. These two requirements cannot be met simultaneously by using the previous material with uniform stiffness throughout its length. We therefore adopted a spring sheath with stiffness that varied between the top and base of the drill. This spring sheath has high stiffness at the base and low stiffness at the top. We performed the experiment to evaluate the effectiveness of the drill with uniform and non-uniform stiffness by comparing each result. Consequently, it was confirmed that the drill with non-uniform stiffness achieved 6 times the bending deformation and with 30% lower force as preventing the buckling compared to the drill with uniform stiffness. Subsequently, we presented a discussion concerning the reason for the experimental result, based on a physical long column model which simulated the steerable drill. In addition, at the end of this paper, a newly-developed control method to make the arbitrary trajectory of the bone tunnel using a steerable drill with non-uniform stiffness was described.

元の言語English
ホスト出版物のタイトルIEEE International Conference on Intelligent Robots and Systems
ページ955-960
ページ数6
DOI
出版物ステータスPublished - 2011
イベント2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics, IROS'11 - San Francisco, CA
継続期間: 2011 9 252011 9 30

Other

Other2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics, IROS'11
San Francisco, CA
期間11/9/2511/9/30

Fingerprint

Tunnels
Bone
Trajectories
Stiffness
Bending (deformation)
Orthopedics
Rigidity
Buckling

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Software
  • Computer Vision and Pattern Recognition
  • Computer Science Applications

これを引用

Watanabe, H., Kanou, K., Kobayashi, Y., & Fujie, M. G. (2011). Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel. : IEEE International Conference on Intelligent Robots and Systems (pp. 955-960). [6048285] https://doi.org/10.1109/IROS.2011.6048285

Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel. / Watanabe, Hiroki; Kanou, Kazuki; Kobayashi, Yo; Fujie, Masakatsu G.

IEEE International Conference on Intelligent Robots and Systems. 2011. p. 955-960 6048285.

研究成果: Conference contribution

Watanabe, H, Kanou, K, Kobayashi, Y & Fujie, MG 2011, Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel. : IEEE International Conference on Intelligent Robots and Systems., 6048285, pp. 955-960, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems: Celebrating 50 Years of Robotics, IROS'11, San Francisco, CA, 11/9/25. https://doi.org/10.1109/IROS.2011.6048285
Watanabe H, Kanou K, Kobayashi Y, Fujie MG. Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel. : IEEE International Conference on Intelligent Robots and Systems. 2011. p. 955-960. 6048285 https://doi.org/10.1109/IROS.2011.6048285
Watanabe, Hiroki ; Kanou, Kazuki ; Kobayashi, Yo ; Fujie, Masakatsu G. / Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel. IEEE International Conference on Intelligent Robots and Systems. 2011. pp. 955-960
@inproceedings{9165a70fa1694e4793a84920d4aa6761,
title = "Development of a {"}steerable drill{"} for ACL reconstruction to create the arbitrary trajectory of a bone tunnel",
abstract = "It is often difficult for orthopedic surgeons to avoid LCL injury during ACL reconstruction. In this paper, we developed a steerable drill for ACL reconstruction to avoid LCL injury in the process of making a bone tunnel. There are two special requirements for the steerable drill mechanism. One is having sufficient flexibility to bend and avoid LCL while cutting the bone. The other is rigidity to avoid the buckle at the base of the drill when external force is exerted on the drill tip. These two requirements cannot be met simultaneously by using the previous material with uniform stiffness throughout its length. We therefore adopted a spring sheath with stiffness that varied between the top and base of the drill. This spring sheath has high stiffness at the base and low stiffness at the top. We performed the experiment to evaluate the effectiveness of the drill with uniform and non-uniform stiffness by comparing each result. Consequently, it was confirmed that the drill with non-uniform stiffness achieved 6 times the bending deformation and with 30{\%} lower force as preventing the buckling compared to the drill with uniform stiffness. Subsequently, we presented a discussion concerning the reason for the experimental result, based on a physical long column model which simulated the steerable drill. In addition, at the end of this paper, a newly-developed control method to make the arbitrary trajectory of the bone tunnel using a steerable drill with non-uniform stiffness was described.",
author = "Hiroki Watanabe and Kazuki Kanou and Yo Kobayashi and Fujie, {Masakatsu G.}",
year = "2011",
doi = "10.1109/IROS.2011.6048285",
language = "English",
isbn = "9781612844541",
pages = "955--960",
booktitle = "IEEE International Conference on Intelligent Robots and Systems",

}

TY - GEN

T1 - Development of a "steerable drill" for ACL reconstruction to create the arbitrary trajectory of a bone tunnel

AU - Watanabe, Hiroki

AU - Kanou, Kazuki

AU - Kobayashi, Yo

AU - Fujie, Masakatsu G.

PY - 2011

Y1 - 2011

N2 - It is often difficult for orthopedic surgeons to avoid LCL injury during ACL reconstruction. In this paper, we developed a steerable drill for ACL reconstruction to avoid LCL injury in the process of making a bone tunnel. There are two special requirements for the steerable drill mechanism. One is having sufficient flexibility to bend and avoid LCL while cutting the bone. The other is rigidity to avoid the buckle at the base of the drill when external force is exerted on the drill tip. These two requirements cannot be met simultaneously by using the previous material with uniform stiffness throughout its length. We therefore adopted a spring sheath with stiffness that varied between the top and base of the drill. This spring sheath has high stiffness at the base and low stiffness at the top. We performed the experiment to evaluate the effectiveness of the drill with uniform and non-uniform stiffness by comparing each result. Consequently, it was confirmed that the drill with non-uniform stiffness achieved 6 times the bending deformation and with 30% lower force as preventing the buckling compared to the drill with uniform stiffness. Subsequently, we presented a discussion concerning the reason for the experimental result, based on a physical long column model which simulated the steerable drill. In addition, at the end of this paper, a newly-developed control method to make the arbitrary trajectory of the bone tunnel using a steerable drill with non-uniform stiffness was described.

AB - It is often difficult for orthopedic surgeons to avoid LCL injury during ACL reconstruction. In this paper, we developed a steerable drill for ACL reconstruction to avoid LCL injury in the process of making a bone tunnel. There are two special requirements for the steerable drill mechanism. One is having sufficient flexibility to bend and avoid LCL while cutting the bone. The other is rigidity to avoid the buckle at the base of the drill when external force is exerted on the drill tip. These two requirements cannot be met simultaneously by using the previous material with uniform stiffness throughout its length. We therefore adopted a spring sheath with stiffness that varied between the top and base of the drill. This spring sheath has high stiffness at the base and low stiffness at the top. We performed the experiment to evaluate the effectiveness of the drill with uniform and non-uniform stiffness by comparing each result. Consequently, it was confirmed that the drill with non-uniform stiffness achieved 6 times the bending deformation and with 30% lower force as preventing the buckling compared to the drill with uniform stiffness. Subsequently, we presented a discussion concerning the reason for the experimental result, based on a physical long column model which simulated the steerable drill. In addition, at the end of this paper, a newly-developed control method to make the arbitrary trajectory of the bone tunnel using a steerable drill with non-uniform stiffness was described.

UR - http://www.scopus.com/inward/record.url?scp=84455167614&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84455167614&partnerID=8YFLogxK

U2 - 10.1109/IROS.2011.6048285

DO - 10.1109/IROS.2011.6048285

M3 - Conference contribution

SN - 9781612844541

SP - 955

EP - 960

BT - IEEE International Conference on Intelligent Robots and Systems

ER -