Development of a wavelength stabilized optical source with a laser diode

Katsumi Isozaki, Masahiro Watari, Eigi Ogita, Katsuya Ikezawa, Toshitsugu Ueda

研究成果: Article

抄録

Optical sensing technology with laser interferometry have been used in industrial metrology. Usually, frequency stabilized lasers have been used for the accurate measurement of length or surface roughness. (1’ However, the length reference of the laser inter-ferometer is the wavelength of light, so optical measurements with a frequency stabilized laser have the disadvantage that the error induced by fluctuations in the refractive index of air must be compensated for. A wavelength stabilized optical source with a laser diode(LD) is proposed for distance measurements, and a compact, precise light source developed using an air-gap etalon as a length reference (wavelength reference). (2) A new and simple method to control the wavelength has been devised, and spectral linewidth reduced simultaneously using this method. Important characteristics of the optical source are wavelength stability and narrow spectral linewidth. Experimental results for wavelength stability were 3x10-9 estimated from the square root of the Allan variance(integration time T is 10 sec). Experimental results for spectral linewidth were 700KHz(with feedback) and 10 MHz(free running). Satisfactory results were obtained for the other characteristics(output power and point stability).

元の言語English
ページ(範囲)99-106
ページ数8
ジャーナルProceedings of SPIE - The International Society for Optical Engineering
1162
DOI
出版物ステータスPublished - 1990 4 25
外部発表Yes

Fingerprint

Laser Diode
Light sources
Semiconductor lasers
semiconductor lasers
Wavelength
Linewidth
wavelengths
Laser
Lasers
Laser Interferometry
Laser interferometry
lasers
Optical Sensing
laser interferometry
Distance Measurement
Optical Measurement
Distance measurement
air
Experimental Results
Surface Roughness

ASJC Scopus subject areas

  • Applied Mathematics
  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering
  • Computer Science Applications

これを引用

Development of a wavelength stabilized optical source with a laser diode. / Isozaki, Katsumi; Watari, Masahiro; Ogita, Eigi; Ikezawa, Katsuya; Ueda, Toshitsugu.

:: Proceedings of SPIE - The International Society for Optical Engineering, 巻 1162, 25.04.1990, p. 99-106.

研究成果: Article

Isozaki, Katsumi ; Watari, Masahiro ; Ogita, Eigi ; Ikezawa, Katsuya ; Ueda, Toshitsugu. / Development of a wavelength stabilized optical source with a laser diode. :: Proceedings of SPIE - The International Society for Optical Engineering. 1990 ; 巻 1162. pp. 99-106.
@article{89587b218a31426aaf0cc0948cfeac85,
title = "Development of a wavelength stabilized optical source with a laser diode",
abstract = "Optical sensing technology with laser interferometry have been used in industrial metrology. Usually, frequency stabilized lasers have been used for the accurate measurement of length or surface roughness. (1’ However, the length reference of the laser inter-ferometer is the wavelength of light, so optical measurements with a frequency stabilized laser have the disadvantage that the error induced by fluctuations in the refractive index of air must be compensated for. A wavelength stabilized optical source with a laser diode(LD) is proposed for distance measurements, and a compact, precise light source developed using an air-gap etalon as a length reference (wavelength reference). (2) A new and simple method to control the wavelength has been devised, and spectral linewidth reduced simultaneously using this method. Important characteristics of the optical source are wavelength stability and narrow spectral linewidth. Experimental results for wavelength stability were 3x10-9 estimated from the square root of the Allan variance(integration time T is 10 sec). Experimental results for spectral linewidth were 700KHz(with feedback) and 10 MHz(free running). Satisfactory results were obtained for the other characteristics(output power and point stability).",
author = "Katsumi Isozaki and Masahiro Watari and Eigi Ogita and Katsuya Ikezawa and Toshitsugu Ueda",
year = "1990",
month = "4",
day = "25",
doi = "10.1117/12.962737",
language = "English",
volume = "1162",
pages = "99--106",
journal = "Proceedings of SPIE - The International Society for Optical Engineering",
issn = "0277-786X",
publisher = "SPIE",

}

TY - JOUR

T1 - Development of a wavelength stabilized optical source with a laser diode

AU - Isozaki, Katsumi

AU - Watari, Masahiro

AU - Ogita, Eigi

AU - Ikezawa, Katsuya

AU - Ueda, Toshitsugu

PY - 1990/4/25

Y1 - 1990/4/25

N2 - Optical sensing technology with laser interferometry have been used in industrial metrology. Usually, frequency stabilized lasers have been used for the accurate measurement of length or surface roughness. (1’ However, the length reference of the laser inter-ferometer is the wavelength of light, so optical measurements with a frequency stabilized laser have the disadvantage that the error induced by fluctuations in the refractive index of air must be compensated for. A wavelength stabilized optical source with a laser diode(LD) is proposed for distance measurements, and a compact, precise light source developed using an air-gap etalon as a length reference (wavelength reference). (2) A new and simple method to control the wavelength has been devised, and spectral linewidth reduced simultaneously using this method. Important characteristics of the optical source are wavelength stability and narrow spectral linewidth. Experimental results for wavelength stability were 3x10-9 estimated from the square root of the Allan variance(integration time T is 10 sec). Experimental results for spectral linewidth were 700KHz(with feedback) and 10 MHz(free running). Satisfactory results were obtained for the other characteristics(output power and point stability).

AB - Optical sensing technology with laser interferometry have been used in industrial metrology. Usually, frequency stabilized lasers have been used for the accurate measurement of length or surface roughness. (1’ However, the length reference of the laser inter-ferometer is the wavelength of light, so optical measurements with a frequency stabilized laser have the disadvantage that the error induced by fluctuations in the refractive index of air must be compensated for. A wavelength stabilized optical source with a laser diode(LD) is proposed for distance measurements, and a compact, precise light source developed using an air-gap etalon as a length reference (wavelength reference). (2) A new and simple method to control the wavelength has been devised, and spectral linewidth reduced simultaneously using this method. Important characteristics of the optical source are wavelength stability and narrow spectral linewidth. Experimental results for wavelength stability were 3x10-9 estimated from the square root of the Allan variance(integration time T is 10 sec). Experimental results for spectral linewidth were 700KHz(with feedback) and 10 MHz(free running). Satisfactory results were obtained for the other characteristics(output power and point stability).

UR - http://www.scopus.com/inward/record.url?scp=84958490411&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84958490411&partnerID=8YFLogxK

U2 - 10.1117/12.962737

DO - 10.1117/12.962737

M3 - Article

AN - SCOPUS:84958490411

VL - 1162

SP - 99

EP - 106

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

SN - 0277-786X

ER -