Development of an electro-optical 3D adapter for stereoscopic video recording

Takashi Shibata, Takashi Kawai, Tetsuri Inoue, Yusuke Sakaguchi, Kazushige Okabe, Yasuhiro Kuno

研究成果: Article査読

5 被引用数 (Scopus)

抄録

We describe the development and evaluation of an electro-optical 3D adapter for recording stereoscopic 3D images with a standard video camcorder. The adapter uses a combination of liquid crystal shutters and a haft prism to record right and left images in each field of an NTSC signal. The purpose of this study was to develop a simple and usable 3D recording system. We investigated the usability of a conventional-model 3D adapter and examined solutions to the problems we found. This adapter has the following characteristics. (1) The 3D recordings were made using the parallel method (2) The frame of the adapter does not obstruct light in any part of the images (3) A correcting lens is used in close-up recordings to equalize the sizes of the right and left images (4) The vertical disparity of each image is easy to adjust (5) The base length can be adjusted to between 65mm and 90mm.

本文言語English
ページ(範囲)325-330
ページ数6
ジャーナルProceedings of SPIE - The International Society for Optical Engineering
4660
1
DOI
出版ステータスPublished - 2002 5 24

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • コンピュータ サイエンスの応用
  • 応用数学
  • 電子工学および電気工学

フィンガープリント

「Development of an electro-optical 3D adapter for stereoscopic video recording」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル