Development of low-background photomultiplier tubes for liquid xenon detectors

XMASS Collaboration

研究成果: Article査読

1 被引用数 (Scopus)

抄録

We successfully developed a new photomultiplier tube (PMT) with a three-inch diameter, convex-shaped photocathode, R13111. Its prominent features include good performance and ultra-low radioactivity. The convex-shaped photocathode realized a large photon acceptance and good timing resolution. Low radioactivity was achieved by three factors: (1) the glass material was synthesized using low-radioactive-contamination material; (2) the photocathode was produced with 39K-enriched potassium; and (3) the purest grade of aluminum material was used for the vacuum seal. As a result each R13111 PMT contains only about 0.4 mBq of 226Ra, less than 2 mBq of 238U, 0.3 mBq of 228Ra, 2 mBq of 40K and 0.2 mBq of 60Co. We also examined and resolved the intrinsic leakage of Xe gas into PMTs that was observed in several older models. We thus succeeded in developing a PMT that has low background, large angular acceptance with high collection efficiency, good timing resolution, and long-term stable operation. These features are highly desirable for experiments searching for rare events beyond the standard model, such as dark matter particle interactions and neutrinoless double beta decay events.

本文言語English
論文番号P09027
ジャーナルJournal of Instrumentation
15
9
DOI
出版ステータスPublished - 2020 9月
外部発表はい

ASJC Scopus subject areas

  • 数理物理学
  • 器械工学

フィンガープリント

「Development of low-background photomultiplier tubes for liquid xenon detectors」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル