Development of sulfonated FEP-Nafion hybrid proton exchange membranes for PEFC

Y. Sato, K. Fujii, N. Mitani, A. Matsuura, T. Kakigi, F. Muto, J. Li, A. Oshima, M. Washio

研究成果: Article査読

18 被引用数 (Scopus)

抄録

The performance of polymer electrolyte fuel cell (PEFC) is affected by an interfacial property between a proton exchange membrane (PEM) and electrodes. Thus, to develop a well-laminated membrane electrode assembly (MEA), a hybrid PEM (FN) was fabricated by mixing a radiation grafted membrane (sulfonated FEP) with ionomer (Nafion® dispersion) which is applied to coat the interface of the PEM and electrodes. The obtained FN, sulfonated FEP and Nafion®112 were characterized in terms of water uptake, ion exchange capacity (IEC), polarization performance and electrochemical impedance. FN showed high IEC and water uptake, which would induce the highest ionic conductivity (IC) among tested PEMs. In terms of FN, the interface between the PEM and electrodes should have been improved because FN showed the lowest charge transfer resistance than other tested PEMs. The high IC and improved interface between the PEM and electrodes resulted in the best cell performance of FN in tested PEMs.

本文言語English
ページ(範囲)213-216
ページ数4
ジャーナルNuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms
265
1
DOI
出版ステータスPublished - 2007 12 1

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Instrumentation

フィンガープリント 「Development of sulfonated FEP-Nafion hybrid proton exchange membranes for PEFC」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル