Development of technologies for eliminating high-level noise emitting vehicles on Japanese roads

Masao Ishihama*, Shigehiko Kaneko, Minoru Kamata, Takeharu Tanaka, Ichiro Sakamoto

*この研究の対応する著者

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

The purpose of the present study is to improve the on-street exhaust noise measurement technique for regulating vehicles that emit unacceptably large exhaust noise. The method under development uses racing operation of engines with a wide-open throttle on a standing vehicle. In contrast, the engine operation condition considered in the conventional on-street measurement technique considers operation at 75% of rated power followed by the throttle valve being released to its original position. The current regulation considers the maximum noise level during this engine operation condition. Accordingly, the engine is not loaded during testing. This loading condition provides unsatisfactory correlation between the exhaust noise level measured by the on-street method and the ISO vehicle acceleration noise under the wide-open throttle condition. The present paper reports the advantages of the proposed method as well as some important factors in the proper application of the newly proposed method. In the present study, we perform noise measurement along highways, a vehicle experiment in an anechoic chassis dynamometer, and computer simulations. The results revealed that the proposed on-street measurement method can be used to approximately determine the exhaust noise level during full acceleration for most vehicle types. In addition, the sensitivities of the measured noise levels for the testing conditions were clarified. The second item in this study is efficient engine speed measurement using exhaust sound signal only without electric wire harnessing. A survey of the measurement systems proposed by three different companies revealed that the measurement principles of two of these systems have potential application to on-street exhaust measurement. The last item investigated herein is better indices of exhaust noise evaluation. Loudness defined by ISO was found to be much better than the conventional dB(A) scale in terms of correlation with subjective evaluation results.

本文言語English
ホスト出版物のタイトル2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
ページ239-246
ページ数8
DOI
出版ステータスPublished - 2009 9月 18
外部発表はい
イベント2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008 - Boston, MA, United States
継続期間: 2008 10月 312008 11月 6

出版物シリーズ

名前ASME International Mechanical Engineering Congress and Exposition, Proceedings
17

Conference

Conference2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
国/地域United States
CityBoston, MA
Period08/10/3108/11/6

ASJC Scopus subject areas

  • 機械工学

フィンガープリント

「Development of technologies for eliminating high-level noise emitting vehicles on Japanese roads」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル