Development of the damage diagnosis on gear tooth surface using a laser beam

Eiichirou Tanaka*, Kazuteru Nagamura, Kiyotaka Ikejo, Ryozo Nemoto, Tatsurou Sugiyama

*この研究の対応する著者

研究成果: Article査読

5 被引用数 (Scopus)

抄録

We developed a new diagnostic method by using a laser beam trom the point of view of remote diagnosis. Our method can be explained as follows : first, a tooth surface is irradiated by a zonal laser beam from oblique direction, and then an irradiated laser beam line is shifted along the height of the tooth according to gear revolution. The variations of the laser reflection between the initial and the present conditions are compared, and it can estimate a condition on the tooth surface such as normal or destructive wear, pitting, spalling, etc. To confirm the validity of our method, a pitting experiment was carried out, and at the same time the laser reflection was measured. As a result, the data of the laser reflection experiment revealed occurrence of the pitting apparent and early. Thus, it can be concluded that our method can accurately estimate the condition of a tooth surface and sufficiently assess the duration of the gear life.

本文言語English
ページ(範囲)1545-1551
ページ数7
ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
73
5
DOI
出版ステータスPublished - 2007 5月
外部発表はい

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 産業および生産工学

フィンガープリント

「Development of the damage diagnosis on gear tooth surface using a laser beam」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル