Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept)

Kiminobu Hirata, Nobuhiko Masaki, Masakazu Yano, Hisashi Akagawa, Jin Kusaka, Keishi Takada, Takayuki Mori

研究成果: Conference contribution

抄録

Some manufacturers of heavy-duty commercial vehicles have adopted Urea-SCR system that can significantly reduce NOX exhaust gas emissions by using a catalyst for the purpose of meeting the Japanese New Long-term Diesel Emissions Regulation. This system can satisfy the demand for excellent fuel economy as well as reduced emissions. With engine modification, combustion efficiency is improved, thereby fuel economy is enhanced and engine-out emissions of PM are also reduced simultaneously. Though NOX emissions increase considerably as a resultant trade-off, a Urea-SCR catalyst is used as an after-treatment technology to reduce the NOX level. As global exhaust emissions regulations will be further strengthened in the near future, along with newly revised fuel consumption standards, the adoption of DPF together with the enhanced catalytic conversion efficiency for the Urea-SCR system is indispensable. Moreover, miniaturization of the after-treatment system is also an important issue. In order to enhance conversion efficiency of the Urea-SCR system, the improvement of (i) catalyst performance itself, (ii) urea dosing system, and (iii) the exhaust gas flow, etc. are required. At first, we focused on improved catalyst performance itself that could have bigger effect on conversion efficiency. The catalyst materials were improved to increase adsorption capability of the NH3 as a reducing agent, resulting in increased NOX and NH3 reaction rates on the catalyst. Furthermore, capacity of the SCR catalyst was increased and oxidation performance in the oxidation catalyst was optimized, which led to enhanced NOX conversion efficiency of the system not only in a steady cycle but also in a transient cycle. In addition, the new concept of 'the Urea-SCR system with the DPF function' was proposed for the miniaturization of the system.

元の言語English
ホスト出版物のタイトルProceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008
ページ65-72
ページ数8
出版物ステータスPublished - 2008
イベント7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008 - Sapporo
継続期間: 2008 7 282008 7 31

Other

Other7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008
Sapporo
期間08/7/2808/7/31

Fingerprint

Commercial vehicles
Catalyst
Thyristors
Urea
Catalysts
Conversion efficiency
Fuel economy
Exhaust gases
Oxidation
Engine
Engines
Concepts
Cycle
Reducing agents
Gas emissions
Fuel consumption
Reaction Rate
Gas Flow
Reaction rates
Flow of gases

ASJC Scopus subject areas

  • Automotive Engineering
  • Control and Systems Engineering
  • Modelling and Simulation

これを引用

Hirata, K., Masaki, N., Yano, M., Akagawa, H., Kusaka, J., Takada, K., & Mori, T. (2008). Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept). : Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008 (pp. 65-72)

Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept). / Hirata, Kiminobu; Masaki, Nobuhiko; Yano, Masakazu; Akagawa, Hisashi; Kusaka, Jin; Takada, Keishi; Mori, Takayuki.

Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008. 2008. p. 65-72.

研究成果: Conference contribution

Hirata, K, Masaki, N, Yano, M, Akagawa, H, Kusaka, J, Takada, K & Mori, T 2008, Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept). : Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008. pp. 65-72, 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008, Sapporo, 08/7/28.
Hirata K, Masaki N, Yano M, Akagawa H, Kusaka J, Takada K その他. Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept). : Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008. 2008. p. 65-72
Hirata, Kiminobu ; Masaki, Nobuhiko ; Yano, Masakazu ; Akagawa, Hisashi ; Kusaka, Jin ; Takada, Keishi ; Mori, Takayuki. / Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept). Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008. 2008. pp. 65-72
@inproceedings{803b3b183f9e4fe78d23358662ebe1a8,
title = "Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept)",
abstract = "Some manufacturers of heavy-duty commercial vehicles have adopted Urea-SCR system that can significantly reduce NOX exhaust gas emissions by using a catalyst for the purpose of meeting the Japanese New Long-term Diesel Emissions Regulation. This system can satisfy the demand for excellent fuel economy as well as reduced emissions. With engine modification, combustion efficiency is improved, thereby fuel economy is enhanced and engine-out emissions of PM are also reduced simultaneously. Though NOX emissions increase considerably as a resultant trade-off, a Urea-SCR catalyst is used as an after-treatment technology to reduce the NOX level. As global exhaust emissions regulations will be further strengthened in the near future, along with newly revised fuel consumption standards, the adoption of DPF together with the enhanced catalytic conversion efficiency for the Urea-SCR system is indispensable. Moreover, miniaturization of the after-treatment system is also an important issue. In order to enhance conversion efficiency of the Urea-SCR system, the improvement of (i) catalyst performance itself, (ii) urea dosing system, and (iii) the exhaust gas flow, etc. are required. At first, we focused on improved catalyst performance itself that could have bigger effect on conversion efficiency. The catalyst materials were improved to increase adsorption capability of the NH3 as a reducing agent, resulting in increased NOX and NH3 reaction rates on the catalyst. Furthermore, capacity of the SCR catalyst was increased and oxidation performance in the oxidation catalyst was optimized, which led to enhanced NOX conversion efficiency of the system not only in a steady cycle but also in a transient cycle. In addition, the new concept of 'the Urea-SCR system with the DPF function' was proposed for the miniaturization of the system.",
keywords = "DPF, SCR, Simulation",
author = "Kiminobu Hirata and Nobuhiko Masaki and Masakazu Yano and Hisashi Akagawa and Jin Kusaka and Keishi Takada and Takayuki Mori",
year = "2008",
language = "English",
pages = "65--72",
booktitle = "Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008",

}

TY - GEN

T1 - Development of urea-SCR system for heavy-duty commercial vehicles (Improvement of SCR catalyst and proposal for new SCR concept)

AU - Hirata, Kiminobu

AU - Masaki, Nobuhiko

AU - Yano, Masakazu

AU - Akagawa, Hisashi

AU - Kusaka, Jin

AU - Takada, Keishi

AU - Mori, Takayuki

PY - 2008

Y1 - 2008

N2 - Some manufacturers of heavy-duty commercial vehicles have adopted Urea-SCR system that can significantly reduce NOX exhaust gas emissions by using a catalyst for the purpose of meeting the Japanese New Long-term Diesel Emissions Regulation. This system can satisfy the demand for excellent fuel economy as well as reduced emissions. With engine modification, combustion efficiency is improved, thereby fuel economy is enhanced and engine-out emissions of PM are also reduced simultaneously. Though NOX emissions increase considerably as a resultant trade-off, a Urea-SCR catalyst is used as an after-treatment technology to reduce the NOX level. As global exhaust emissions regulations will be further strengthened in the near future, along with newly revised fuel consumption standards, the adoption of DPF together with the enhanced catalytic conversion efficiency for the Urea-SCR system is indispensable. Moreover, miniaturization of the after-treatment system is also an important issue. In order to enhance conversion efficiency of the Urea-SCR system, the improvement of (i) catalyst performance itself, (ii) urea dosing system, and (iii) the exhaust gas flow, etc. are required. At first, we focused on improved catalyst performance itself that could have bigger effect on conversion efficiency. The catalyst materials were improved to increase adsorption capability of the NH3 as a reducing agent, resulting in increased NOX and NH3 reaction rates on the catalyst. Furthermore, capacity of the SCR catalyst was increased and oxidation performance in the oxidation catalyst was optimized, which led to enhanced NOX conversion efficiency of the system not only in a steady cycle but also in a transient cycle. In addition, the new concept of 'the Urea-SCR system with the DPF function' was proposed for the miniaturization of the system.

AB - Some manufacturers of heavy-duty commercial vehicles have adopted Urea-SCR system that can significantly reduce NOX exhaust gas emissions by using a catalyst for the purpose of meeting the Japanese New Long-term Diesel Emissions Regulation. This system can satisfy the demand for excellent fuel economy as well as reduced emissions. With engine modification, combustion efficiency is improved, thereby fuel economy is enhanced and engine-out emissions of PM are also reduced simultaneously. Though NOX emissions increase considerably as a resultant trade-off, a Urea-SCR catalyst is used as an after-treatment technology to reduce the NOX level. As global exhaust emissions regulations will be further strengthened in the near future, along with newly revised fuel consumption standards, the adoption of DPF together with the enhanced catalytic conversion efficiency for the Urea-SCR system is indispensable. Moreover, miniaturization of the after-treatment system is also an important issue. In order to enhance conversion efficiency of the Urea-SCR system, the improvement of (i) catalyst performance itself, (ii) urea dosing system, and (iii) the exhaust gas flow, etc. are required. At first, we focused on improved catalyst performance itself that could have bigger effect on conversion efficiency. The catalyst materials were improved to increase adsorption capability of the NH3 as a reducing agent, resulting in increased NOX and NH3 reaction rates on the catalyst. Furthermore, capacity of the SCR catalyst was increased and oxidation performance in the oxidation catalyst was optimized, which led to enhanced NOX conversion efficiency of the system not only in a steady cycle but also in a transient cycle. In addition, the new concept of 'the Urea-SCR system with the DPF function' was proposed for the miniaturization of the system.

KW - DPF

KW - SCR

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=84879632474&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84879632474&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84879632474

SP - 65

EP - 72

BT - Proceedings of the 7th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2008

ER -