Direct shaping of alumina ceramics by electrophoretic deposition using conductive polymer-coated ceramic substrates

T. Uchikoshi, S. Furumi, T. S. Suzuki, Y. Sakka

研究成果: Conference contribution

2 引用 (Scopus)

抜粋

Cathodic electrophoretic deposition of bimodal alumina suspension was performed using conductive polypyrrole (Ppy) film as an electrode. The coating of the Ppy on nonconductive ceramic substrates was performed by polymerization of pyrrole (Py) in an aqueous solution. The relative green density of the deposits measured by Archimedes' method was 68 %. Alumina ceramics were obtained by sintering the deposits together with the Ppy coated ceramic substrates in air.

元の言語English
ホスト出版物のタイトルAdvanced Materials and Processing IV - Selected, peer reviewed papers presented at the 4th International Conference on Advanced Materials and Processing
出版者Trans Tech Publications
ページ227-230
ページ数4
ISBN(印刷物)0878494669, 9780878494668
出版物ステータスPublished - 2007 1 1
外部発表Yes
イベント4th International Conference on Advanced Materials and Processing, ICAMP-4 - Hamilton, New Zealand
継続期間: 2006 12 102006 12 13

出版物シリーズ

名前Advanced Materials Research
29-30
ISSN(印刷物)1022-6680

Conference

Conference4th International Conference on Advanced Materials and Processing, ICAMP-4
New Zealand
Hamilton
期間06/12/1006/12/13

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント Direct shaping of alumina ceramics by electrophoretic deposition using conductive polymer-coated ceramic substrates' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Uchikoshi, T., Furumi, S., Suzuki, T. S., & Sakka, Y. (2007). Direct shaping of alumina ceramics by electrophoretic deposition using conductive polymer-coated ceramic substrates. : Advanced Materials and Processing IV - Selected, peer reviewed papers presented at the 4th International Conference on Advanced Materials and Processing (pp. 227-230). (Advanced Materials Research; 巻数 29-30). Trans Tech Publications.