Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller

Kazuteru Nagamura, Takamasa Hirai, Kiyotaka Ikejo, Toshiyuki Koumori, Eiichirou Tanaka, Ichiro Kamimura

研究成果: Conference contribution

抄録

This paper describes a new type planetary gear drive with the high reduction ratio. The planetary gear drive is mechanically similar to a 2S-C type planetary gear, which has two sun gears and one carrier. The planetary gear drive has two pairs of an arc tooth profile gear and a pin roller, which mesh each other. The planetary gear drive has little backlash, a high efficiency, a long fatigue limit, etc., because the tooth contact holds on concave and convex surfaces. In this study, we measured the vibration acceleration, the transmission error, the gear noise, and the efficiency on the new type planetary gear drive by the running test. We discuss and report the driving performance of the planetary gear drive.

本文言語English
ホスト出版物のタイトル2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007
ページ247-254
ページ数8
DOI
出版ステータスPublished - 2008 6 13
外部発表はい
イベント10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007 - Las Vegas, NV, United States
継続期間: 2007 9 42007 9 7

出版物シリーズ

名前2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007
7

Other

Other10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007
CountryUnited States
CityLas Vegas, NV
Period07/9/407/9/7

ASJC Scopus subject areas

  • Computer Graphics and Computer-Aided Design
  • Computer Science Applications
  • Mechanical Engineering
  • Modelling and Simulation

フィンガープリント 「Driving performance of high reduction planetary gear drive with meshing of arc tooth profile gear and pin roller」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル