Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds

Yuichi Motoyama*, Hiroki Takahashi, Yuki Inoue, Keita Shinji, Makoto Yoshida

*この研究の対応する著者

研究成果: Article査読

10 被引用数 (Scopus)

抄録

The load on flange castings in sand molds was gradually increased beginning from the end of the solidification process until the final cooling stage. The maximum tensile load on the flange castings in furan sand molds was larger than that of the flange castings in green sand molds. With the furan sand mold, permanent deformation in the flange castings occurred beginning from the end of the solidification process until reaching a temperature of approximately 250°C. The mechanical interaction between the casting and the sand mold should be considered for more accurate stress calculations, particularly in furan sand molds.

本文言語English
ページ(範囲)238-244
ページ数7
ジャーナルJournal of Materials Processing Technology
213
2
DOI
出版ステータスPublished - 2013 2

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • コンピュータ サイエンスの応用
  • 金属および合金
  • 産業および生産工学

フィンガープリント

「Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル