Dynamic tensile properties of carbon fiber composite based on thermoplastic epoxy resin loaded in matrix-dominant directions

Norihiko Taniguchi*, Tsuyoshi Nishiwaki, Norio Hirayama, Hirofumi Nishida, Hiroyuki Kawada

*この研究の対応する著者

研究成果: Article査読

29 被引用数 (Scopus)

抄録

The dynamic tensile properties of carbon fiber (CF) composite loaded in the matrix-dominant direction are experimentally determined. In this study, thermoplastic epoxy resin is used as a matrix of the CF composite. A dynamic tensile test is performed using a tension-type split Hopkinson bar technique. The experimental results show that there are not linear relationships between tensile strength and strain rate in case of the 10°, 30° and 45° specimens, although the tensile strength of CF composite, whose matrix is typical thermosetting epoxy resin, linearly increases with the strain rate for all fiber orientation angles. From the fracture surface observation, it is found that the ductile fracture of the matrix can be observed only when 10° off-axis specimen is tested under dynamic loading condition. It is inferred that the softening of the thermoplastic epoxy resin in the vicinity of interface area takes place with increasing strain rate.

本文言語English
ページ(範囲)207-213
ページ数7
ジャーナルComposites Science and Technology
69
2
DOI
出版ステータスPublished - 2009 2

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 工学(全般)

フィンガープリント

「Dynamic tensile properties of carbon fiber composite based on thermoplastic epoxy resin loaded in matrix-dominant directions」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル