Effect of cementite on ductile fracture in high tensile strength steel sheets

Mari Maeda, Junji Shimamura, Shinsuke Suzuki

    研究成果: Conference contribution

    抄録

    In this study, voids formation behavior was investigated quantitatively in high tensile strength steel sheets containing cementite. Tensile tests of rectangular specimen were performed in longitudinal direction, and after the tensile tests, the fractured specimens were observed by SEM in the center position of longitudinal cross section. Voids were observed in five thickness reduction areas with different strain level. As a result, number density of voids increased as strain increased. Mainly, two types of voids were seen here. One was the decohesion at the boundaries between bainitic ferrite and cementite, and the other was cracking of cementite itself. Misorientation in the crystal grains was determined by KAM (Kernel Average Misorientation) using EBSD analysis. The obtained KAM values increased as strain increased, especially in the boundaries between bainitic ferrite and cementite. Therefore, it was revealed quantitatively that voids formed mainly through local strain increase in the boundaries between bainitic ferrite and cementite.

    元の言語English
    ホスト出版物のタイトルMaterials Science and Technology Conference and Exhibition 2016, MS and T 2016
    出版者Association for Iron and Steel Technology, AISTECH
    ページ573-577
    ページ数5
    1
    ISBN(電子版)9781510833142
    出版物ステータスPublished - 2016
    イベントMaterials Science and Technology Conference and Exhibition 2016, MS and T 2016 - Salt Lake City, United States
    継続期間: 2016 10 232016 10 27

    Other

    OtherMaterials Science and Technology Conference and Exhibition 2016, MS and T 2016
    United States
    Salt Lake City
    期間16/10/2316/10/27

    Fingerprint

    Ductile fracture
    Steel sheet
    Tensile strength
    Ferrite
    Crystals
    Scanning electron microscopy

    ASJC Scopus subject areas

    • Materials Science (miscellaneous)
    • Mechanics of Materials
    • Energy Engineering and Power Technology

    これを引用

    Maeda, M., Shimamura, J., & Suzuki, S. (2016). Effect of cementite on ductile fracture in high tensile strength steel sheets. : Materials Science and Technology Conference and Exhibition 2016, MS and T 2016 (巻 1, pp. 573-577). Association for Iron and Steel Technology, AISTECH.

    Effect of cementite on ductile fracture in high tensile strength steel sheets. / Maeda, Mari; Shimamura, Junji; Suzuki, Shinsuke.

    Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. 巻 1 Association for Iron and Steel Technology, AISTECH, 2016. p. 573-577.

    研究成果: Conference contribution

    Maeda, M, Shimamura, J & Suzuki, S 2016, Effect of cementite on ductile fracture in high tensile strength steel sheets. : Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. 巻. 1, Association for Iron and Steel Technology, AISTECH, pp. 573-577, Materials Science and Technology Conference and Exhibition 2016, MS and T 2016, Salt Lake City, United States, 16/10/23.
    Maeda M, Shimamura J, Suzuki S. Effect of cementite on ductile fracture in high tensile strength steel sheets. : Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. 巻 1. Association for Iron and Steel Technology, AISTECH. 2016. p. 573-577
    Maeda, Mari ; Shimamura, Junji ; Suzuki, Shinsuke. / Effect of cementite on ductile fracture in high tensile strength steel sheets. Materials Science and Technology Conference and Exhibition 2016, MS and T 2016. 巻 1 Association for Iron and Steel Technology, AISTECH, 2016. pp. 573-577
    @inproceedings{0f6ad2766c864fefa05006b1bebad3d7,
    title = "Effect of cementite on ductile fracture in high tensile strength steel sheets",
    abstract = "In this study, voids formation behavior was investigated quantitatively in high tensile strength steel sheets containing cementite. Tensile tests of rectangular specimen were performed in longitudinal direction, and after the tensile tests, the fractured specimens were observed by SEM in the center position of longitudinal cross section. Voids were observed in five thickness reduction areas with different strain level. As a result, number density of voids increased as strain increased. Mainly, two types of voids were seen here. One was the decohesion at the boundaries between bainitic ferrite and cementite, and the other was cracking of cementite itself. Misorientation in the crystal grains was determined by KAM (Kernel Average Misorientation) using EBSD analysis. The obtained KAM values increased as strain increased, especially in the boundaries between bainitic ferrite and cementite. Therefore, it was revealed quantitatively that voids formed mainly through local strain increase in the boundaries between bainitic ferrite and cementite.",
    keywords = "Cementite, Ductile fracture, EBSD, High tensile strength steel sheet, KAM, Void",
    author = "Mari Maeda and Junji Shimamura and Shinsuke Suzuki",
    year = "2016",
    language = "English",
    volume = "1",
    pages = "573--577",
    booktitle = "Materials Science and Technology Conference and Exhibition 2016, MS and T 2016",
    publisher = "Association for Iron and Steel Technology, AISTECH",
    address = "United States",

    }

    TY - GEN

    T1 - Effect of cementite on ductile fracture in high tensile strength steel sheets

    AU - Maeda, Mari

    AU - Shimamura, Junji

    AU - Suzuki, Shinsuke

    PY - 2016

    Y1 - 2016

    N2 - In this study, voids formation behavior was investigated quantitatively in high tensile strength steel sheets containing cementite. Tensile tests of rectangular specimen were performed in longitudinal direction, and after the tensile tests, the fractured specimens were observed by SEM in the center position of longitudinal cross section. Voids were observed in five thickness reduction areas with different strain level. As a result, number density of voids increased as strain increased. Mainly, two types of voids were seen here. One was the decohesion at the boundaries between bainitic ferrite and cementite, and the other was cracking of cementite itself. Misorientation in the crystal grains was determined by KAM (Kernel Average Misorientation) using EBSD analysis. The obtained KAM values increased as strain increased, especially in the boundaries between bainitic ferrite and cementite. Therefore, it was revealed quantitatively that voids formed mainly through local strain increase in the boundaries between bainitic ferrite and cementite.

    AB - In this study, voids formation behavior was investigated quantitatively in high tensile strength steel sheets containing cementite. Tensile tests of rectangular specimen were performed in longitudinal direction, and after the tensile tests, the fractured specimens were observed by SEM in the center position of longitudinal cross section. Voids were observed in five thickness reduction areas with different strain level. As a result, number density of voids increased as strain increased. Mainly, two types of voids were seen here. One was the decohesion at the boundaries between bainitic ferrite and cementite, and the other was cracking of cementite itself. Misorientation in the crystal grains was determined by KAM (Kernel Average Misorientation) using EBSD analysis. The obtained KAM values increased as strain increased, especially in the boundaries between bainitic ferrite and cementite. Therefore, it was revealed quantitatively that voids formed mainly through local strain increase in the boundaries between bainitic ferrite and cementite.

    KW - Cementite

    KW - Ductile fracture

    KW - EBSD

    KW - High tensile strength steel sheet

    KW - KAM

    KW - Void

    UR - http://www.scopus.com/inward/record.url?scp=85017211973&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85017211973&partnerID=8YFLogxK

    M3 - Conference contribution

    AN - SCOPUS:85017211973

    VL - 1

    SP - 573

    EP - 577

    BT - Materials Science and Technology Conference and Exhibition 2016, MS and T 2016

    PB - Association for Iron and Steel Technology, AISTECH

    ER -