Effect of firing temperature on surface morphology of nanosized ferrite-based thick film with linseed oil as organic vehicle

Intan Helina Hasan*, Mohd Nizar Hamidon, Muhammad Asnawi Mohd Kusaimi, Saman Azhari, Nur Alin Mohd Azhari, Rosiah Osman, Juraina Md Yusof, Ismayadi Ismail

*この研究の対応する著者

研究成果: Article査読

抄録

This paper presents the results of morphological study on nanosized nickel zinc ferrite (NZF) thick film using linseed oil as organic vehicle and nanosized NZF powder. First, NZF nanopowder is mixed with organic vehicle which consists of linseed oil, m-xylene and α-terpineol. Paste samples were screen printed onto alumina as substrate, dried and fired at different temperatures of 100°C, 200°C, and 300°C, respectively. Microscopic images of the samples and elemental analysis were observed to determine good dispersion of the active powder with the organic vehicle. Based on the results, the nanoparticles were uniformly dispersed, and images of thick films fired at 200°C and 300°C have shown clearly visible particles, indicating that at these temperatures, the organic vehicle has started to evaporate on the surface, revealing nanoparticles of the active powders. The elemental analysis confirmed this idea, of which carbon element of the organic vehicle gradually decreased with increasing temperature.

本文言語English
ページ(範囲)660-667
ページ数8
ジャーナルInternational Journal of Nanotechnology
16
11-12
DOI
出版ステータスPublished - 2019
外部発表はい

ASJC Scopus subject areas

  • バイオエンジニアリング
  • 凝縮系物理学
  • 電子工学および電気工学
  • 材料化学

フィンガープリント

「Effect of firing temperature on surface morphology of nanosized ferrite-based thick film with linseed oil as organic vehicle」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル