Effect of small steel-piece size on charpy absorbed energy

D. Kitazume, K. Ono, K. Anami, T. Iida

研究成果: Conference contribution

抄録

It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.

元の言語English
ホスト出版物のタイトルMaintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018
編集者Dan M. Frangopol, Riadh Al-Mahaidi, Colin Caprani, Nigel Powers
出版者CRC Press/Balkema
ページ2889-2893
ページ数5
ISBN(印刷物)9781138730458
出版物ステータスPublished - 2018 1 1
イベント9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018 - Melbourne, Australia
継続期間: 2018 7 92018 7 13

出版物シリーズ

名前Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018

Conference

Conference9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018
Australia
Melbourne
期間18/7/918/7/13

Fingerprint

Fracture toughness
Steel
Retrofitting
Steel bridges
Bolts
Electron beams
Welds
Acoustic waves

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Safety, Risk, Reliability and Quality

これを引用

Kitazume, D., Ono, K., Anami, K., & Iida, T. (2018). Effect of small steel-piece size on charpy absorbed energy. : D. M. Frangopol, R. Al-Mahaidi, C. Caprani, & N. Powers (版), Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018 (pp. 2889-2893). (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018). CRC Press/Balkema.

Effect of small steel-piece size on charpy absorbed energy. / Kitazume, D.; Ono, K.; Anami, K.; Iida, T.

Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. 版 / Dan M. Frangopol; Riadh Al-Mahaidi; Colin Caprani; Nigel Powers. CRC Press/Balkema, 2018. p. 2889-2893 (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018).

研究成果: Conference contribution

Kitazume, D, Ono, K, Anami, K & Iida, T 2018, Effect of small steel-piece size on charpy absorbed energy. : DM Frangopol, R Al-Mahaidi, C Caprani & N Powers (版), Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, CRC Press/Balkema, pp. 2889-2893, 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, Melbourne, Australia, 18/7/9.
Kitazume D, Ono K, Anami K, Iida T. Effect of small steel-piece size on charpy absorbed energy. : Frangopol DM, Al-Mahaidi R, Caprani C, Powers N, 編集者, Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. CRC Press/Balkema. 2018. p. 2889-2893. (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018).
Kitazume, D. ; Ono, K. ; Anami, K. ; Iida, T. / Effect of small steel-piece size on charpy absorbed energy. Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018. 編集者 / Dan M. Frangopol ; Riadh Al-Mahaidi ; Colin Caprani ; Nigel Powers. CRC Press/Balkema, 2018. pp. 2889-2893 (Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018).
@inproceedings{1dae3e6da0414b4e88971cf138456bf2,
title = "Effect of small steel-piece size on charpy absorbed energy",
abstract = "It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.",
author = "D. Kitazume and K. Ono and K. Anami and T. Iida",
year = "2018",
month = "1",
day = "1",
language = "English",
isbn = "9781138730458",
series = "Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018",
publisher = "CRC Press/Balkema",
pages = "2889--2893",
editor = "Frangopol, {Dan M.} and Riadh Al-Mahaidi and Colin Caprani and Nigel Powers",
booktitle = "Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018",

}

TY - GEN

T1 - Effect of small steel-piece size on charpy absorbed energy

AU - Kitazume, D.

AU - Ono, K.

AU - Anami, K.

AU - Iida, T.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.

AB - It is necessary to gain the information on the mechanical, chemical, and fracture properties of their materials in order to find out cause of damage and examine retrofitting methods for repairing damaged steel bridges. One of the properties used to investigate retrofitting methods is fracture toughness. Charpy impact tests are conducted in order to examine fracture toughness. The size of test specimens of Charpy impact tests is specified in Japanese Industrial Standards. Test specimens must be shaped according to the specific size, but it is desirable to take smaller material from sound material. Therefore, this study aims to make test specimens with small steel pieces in order to estimate fracture toughness. The size of small steel pieces was set as they can be taken from stop holes or bolt holes. Test specimens were made with these small steel pieces by electron beam weld. Then the effect of steel piece size on Charpy absorbed energy was examined.

UR - http://www.scopus.com/inward/record.url?scp=85067064978&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85067064978&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85067064978

SN - 9781138730458

T3 - Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018

SP - 2889

EP - 2893

BT - Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018

A2 - Frangopol, Dan M.

A2 - Al-Mahaidi, Riadh

A2 - Caprani, Colin

A2 - Powers, Nigel

PB - CRC Press/Balkema

ER -