Effect of surface treatment and crystal orientation on hot corrosion of a Ni-based single-crystal superalloy

X. Montero, A. Ishida, T. M. Meißner, H. Murakami, M. C. Galetz

研究成果: Article

2 引用 (Scopus)

抜粋

The effect of surface preparation and crystal orientation was investigated for a TMS-138 single crystal superalloy under Type I and Type II hot corrosion conditions. The superalloy was cut along the {100} and {110} planes on which grit blasting, mechanical polishing and electro-polishing surface finishes were conducted. At 900 °C grit blasting or electropolishing distorted the surface and altered the γ-γ’ structure of the alloy provoking higher corrosion rates than on mechanically polished surfaces. The electropolished surface revealed that crystal planes with higher atomic number density have an increased corrosion resistance. The anisotropy effects were not observed with Type II exposures.

元の言語English
記事番号108472
ジャーナルCorrosion Science
166
DOI
出版物ステータスPublished - 2020 4 15

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Science(all)

フィンガープリント Effect of surface treatment and crystal orientation on hot corrosion of a Ni-based single-crystal superalloy' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用