Effect of twisted tape on liquid film flow rate in rod bundle

Miyuki Akiba*, Shinichi Morooka, Kenetsu Shirakawa

*この研究の対応する著者

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

For a boiling water reactor (BWR), high critical-power fuel assemblies are needed to increase the thermal safety margin of the reactor core. There are seven spacers supporting the fuel rods in a BWR fuel assembly, and it is well known that the critical power is affected by the spacer geometry. Studies of spacer geometry are therefore important to the development of high critical-power fuel assemblies. Recently, Morooka et al. reported that a twisted tape increased the critical power. Figure 4 shows the improved spacer which has twisted tapes. The purpose of this study was to clarify the mechanism by which the twisted tape improves critical power by measuring the film flow rate on the fuel rod under air-water conditions. The test data shows that the twisted tape increases the film flow rate in the annular dispersed flow regime. It is thought likely that a swirling flow is generated downstream of the twisted tape and that droplet deposition is promoted by the swirl. We believe this is why the twisted tape increases critical power.

本文言語English
ホスト出版物のタイトルProceedings of the ASME Fluids Engineering Division Summer Meeting
編集者T.J. O Hern, T.J. O Hern
ページ437-441
ページ数5
2
出版ステータスPublished - 2003
外部発表はい
イベント2001 ASME Fluids Engineering Division Summer Meeting - New Orleans, LA
継続期間: 2001 5月 292001 6月 1

Other

Other2001 ASME Fluids Engineering Division Summer Meeting
CityNew Orleans, LA
Period01/5/2901/6/1

ASJC Scopus subject areas

  • 機械工学
  • 流体および伝熱

フィンガープリント

「Effect of twisted tape on liquid film flow rate in rod bundle」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル