EFFECTS OF COMBUSTION CHAMBER GEOMETRY IN A DIRECT-INJECTION DIESEL ENGINE (COMPARISON OF RE-ENTRANT AND CONVENTIONAL CHAMBERS).

Yasuhiro Daisho*, Takeshi Saito, Nobuyuki Ikeya

*この研究の対応する著者

研究成果: Article査読

7 被引用数 (Scopus)

抄録

Two conventional combustion chamber types and a re-entrant type of direct-injection diesel engine were compared in order to investigate the effects of heat transfer and in-cylinder flow associated with the combustion chamber geometry on combustion itself, engine performance and exhaust gas emissions. Heat transfer calculation and heat release analyses have shown that the re-entrant chamber tends to reduce ignition lag due to the higher chamber wall temperatures. In-cylinder flow measurements using hot wire anemometry have indicated that the re-entrant chamber generates a higher turbulence level, particularly around the top dead center, causing an increase in the rate of heat release. Thus, the re-entrant chamber can favorably improve both fuel economy and smoke, even though fuel injection timing is retarded to reduce NO//x emission.

本文言語English
ページ(範囲)2768-2773
ページ数6
ジャーナルNippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
52
479
出版ステータスPublished - 1986 7
外部発表はい

ASJC Scopus subject areas

  • 機械工学

フィンガープリント

「EFFECTS OF COMBUSTION CHAMBER GEOMETRY IN A DIRECT-INJECTION DIESEL ENGINE (COMPARISON OF RE-ENTRANT AND CONVENTIONAL CHAMBERS).」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル